Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS437167
Only available in Black.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
Removed the screws that held the outside drawer cover, then removed the screws on the inside. Found out that one of the handle screws had come loose and fallen inside. This was probably why the handle cracked in the first place. Once I put the new handle on and made sure the screws were all tight everything was fine.
Help other customers find the most helpful instructions.
Were these instructions helpful?
removed face screws from drawer. Previous poster described our problem exactly- middle screw on drawer pull had come loose and fallen down, which probably caused the pull to break in the first place, just as his had done. Replaced handle- very easy and like brand-new. Great site- easy to navigate and find the right parts, very fast shipping.
Lifted the drawer out from the oven and removed top and bottom screws. Replaced the handle and tightened the screws.
I removed the screws holding the element in place. Then I screwed in the new part. No problem at all.
Removed the face ot the drawer, revealing the screws. Took off the remaining screw holding only a piece of the old handle. Replaced with the new handle and replaced the face.Easy
This product was super easy to apply. The part came in perfect condition and when I discovered 2 of the screws had fallen into the actual door (causing the door to apply pressure unevenly to the handle when pulled) fixing it was a snap.
I simply typed in the model number and hit search. I found the replacment handle right away. The grid picture allowed me to make sure the size was the same. Your web site is top notch! Finding, ordering and shipping was all fast! There was several screws holding the door together. I took them out and the door apart. Removed the old handle and put on the new. It had 4 screws. Put it back together. In all about 15 minutes and easy. If you have a part I need I will not even bother to look else where! Thanks again!
had to take the drawer completely apart to get to the handle screws. assembled the handle with the help of a male neighbor because of getting the screws in. they turned hard put the drawer back together. wasn't sure how to get the rear guide in or out. broke one trying, finally got it.
remove 8 screws and replaced handle. Very easy.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.