Quick Question!

Have you ever purchased from PartSelect.com before?

436633-1-S-Frigidaire-316011200         -Surface Burner Igniter Electrode
436633-1-S-Frigidaire-316011200         -Surface Burner Igniter Electrode 436633-2-S-Frigidaire-316011200         -Surface Burner Igniter Electrode 436633-3-S-Frigidaire-316011200         -Surface Burner Igniter Electrode http://www.partselect.com/Schematics/Frigidaire/VLAJQG0H.gif

Surface Burner Igniter Electrode

PartSelect Number PS436633

Use this igniter with sealed burners.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Will Not Start.
  • Gas igniter glows, but will not light.
  • Element will not heat.
  • Compare At

    $14.17
  • You Save

    $2.36
  • Your Price

    $11.81
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 5 reviews What's this?
1-5 of 5
 

39 of 55 people found this instruction helpful

Parts Used:
  • Surface Burner Igniter Electrode
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Rusty from Howell, NJ

Igniter porcelain was cracked and burner would not light.

un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used:
  • Surface Burner Igniter Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Wrench set
Customer: chris from Venice, CA

Bad igniter.

The stove was older so the burner was hard to get out. The small screw heads broke off, so I had to carefully center punch and drill out the screw bodies. The igniter screw was also frozen in the pot metal burner. That screw requied drilling and tapping with the installation of a new 6-32 screw. Once the burner was refurbished, the igniter mounted easily. Afte attaching the gas line and igniter wire, the burner worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used:
  • Surface Burner Igniter Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Terry from Wilkinson, IN

Burner would not lite

no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 30 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Socket set
Customer: Pam from Belle Vernon, PA

Broken inner door glass, broken igniter, and the bottom oven panel was rusted

First, I want to say how WONDERFUL your service was. I needed more info on a part and your phone rep. e-mailed me a picture of the part from which I was able to be sure it was the right part. I ordered the pard one day and they were delivered to my door the NEXT DAY....talk about service!!!

My husband did all the replacing, he had no problems with any of the 3 items he replaced, he said they were all easy to replace. They all work great. Thank You!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used:
  • Surface Burner Igniter Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Socket set
Customer: David from Livingston, MT

Igniter replacement

Burner set screws froze up, was able to break 2 of 3 free and broke 3rd off. Used new simular screws to re- thread and fasten burner back in place. Bit of work but everything working. Used oppertunity to clean and re-level while I was at it. Everything good to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5