Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS430917
This drawer track supports the right hand side of the sliding drawer.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
This drawer rail supports the left hand side of the sliding drawer.
It was easy. I handed it to my husband.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I unscrewed the old drawer support and screwed the new one in. It was very simple!
Repair was quite easy. Simply remove screw and replace part. My repairman charges a min. fee of $99 to come by. I did this myself and saved an easy $100! The part came very quickly--next day after I ordered it. Would definitely do this again.
Unscrewed the broken piece; screwed in the new and re-installed the drawer unit.
First, remove shelf unit from refrigerator and lay glass side down on a large flat surface. Observe, then pay attention to assembly. Spent more time with this, drinking coffee, and playing with puppy, than the actual repair. Only had to remove and replace twophillips head screws. Replace deli - meat drawer after shelf unit is in place in refrigerator. Check for clearance for door to close.
I unscrewed the old drawer support rail and installed the new one. The phone rep. was excellent. He listened to what I needed, looked up the parts for me, and sent me the correct parts the first time. I think the parts arrived within two days, much faster then I expected. I will be doing business with you again whenever I need parts. Thank you for your excellent service. You exceeded my expectations.Sincerely,Rob Ponitz
Very, very easy problem to fix. I took the shelf that the support rails were attached to out of refrigerator. Unscrewed broke piece and screwed in new support rail and simply slid shelf back into refrigerator. Ta~Da! If I can do it, you can do it!
removed shelf. took out screw. replaced support
Took longer to clear the top shelf to remove it from the refrigerator to do the repairs. Super easy!
As others have noted: this is an easy repair. I spent more time clearing all of our containers of yogurt that the actually "repair."This is a good opportunity to clean the glass shelf and so I did that after removing it. Unscrewed the back support screw, removed old rail, and installed new one. (I just used the old screw as it seemed to be in good shape).
The first thing I did was to remove all the food from the shelf above the drawer. I removed the old support rail that is attached at the rear of the shelf by one phillips screw. I installed the new support and secured it. Partselect was a great place to purchase the part and they shipped the part quickly.
Removed shelf, inverted it, removed broken part (one screw), installed new shelf rail.Piece of cake.
first i removed the screw from the back of the shelf then pulled the old rail off. I sliped the new rail onto the post then replace the rear screw.
Unscrewed the screw that held the suport rail to the shilf and changed the rail. Then I screw in the new rail.
snapped rails off of bottom door rail and replaced with new rail and supports, bottom rail and support was cracked causing rail to fall off very easily. works great now.meat tray rail broken, fixed meat tray rail so we could be tray back into frig, everything worked out great, parts arrived within 2 days from time i ordered them. just like new fridge.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.