Quick Question!

Have you ever purchased from PartSelect.com before?

430917-1-S-Frigidaire-240530701         -Drawer Support Rail - Right Side
430917-1-S-Frigidaire-240530701         -Drawer Support Rail - Right Side 430917-2-S-Frigidaire-240530701         -Drawer Support Rail - Right Side 430917-3-S-Frigidaire-240530701         -Drawer Support Rail - Right Side http://www.partselect.com/Schematics/Frigidaire/IRXEIGK5.gif

Drawer Support Rail - Right Side

PartSelect Number PS430917

This drawer track supports the right hand side of the sliding drawer.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door won’t open or close.

Compare At

$32.14

You Save

$5.36

Your Price

$26.78
Order within the next 53 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Support Rail - Left Side

Part Number 430916

This drawer rail supports the left hand side of the sliding drawer.

Order within the next 53 mins and your part ships today!
$27.45
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 42 reviews What's this?
 

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Thelbert from Alton, VA

Wear and tear

Super easy. It took longer to remove and replace the stuff in my fridge than it did to install the parts. Removing the top shelf makes it easier. One screw on the drawer support rail and the other two parts just snapped onto the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: kathleen from cypress, CA

The meat drawer slide had broken and the drawer would fall down everytime you opened it.

Pulled the drawer out, lifted the shelf out of the refrigerator, unscrewed drawer slides from shelf and rescrewed the new drawer slides and returned the shelf, drawer, and the job was finished. Thank you so very much for your speedy delivery.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Dena from Gardner, MA

All three door shelf retainer bars broken over course of two years

Snapped end caps on rails, snapped rails onto door. Regained large amount of useable space in refrigerator. Parts fit perfectly. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mary from Winston Salem, NC

Broken drawer supports and door shelf bin.

It was self explanitory, there were screws that you had to unscrew the old drawer supports to replace with the new ones and the door shelf bin I just had to put it into place. Just like NEW

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Taylor from Greenville, SC

Plastic support on rail had broken off

Easy peasy... took the shelf out of the fridge. Unscrewed the old rail. Screwed in the new one. Put the shelf back in. DONE!!!!

My local appliance repair shop said they would have to order the whole shelf in order to fix my problem. It was going to cost $50 and I'd have to wait 3 weeks.

Instead, I found you guys on the internet. The part cost $5 and I got in delivered in 2 days.... CAN'T BEAT THAT!!!!

Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Bruce from Rochester, NH

The bottom shelf retainer bar on the door and both drawer support rails were broken and the knob and kickplate were lost

There's really nothing to tell about installing the parts on my refrigerator. Everything fit exactly like it was supposed to and the job only took abot 20 minutes. I was also impressed at how easy it was to find the parts on this website with just the model number.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Melvin from THIBODAUX, LA

Drwr. Suppt. Broken-- cracked

took off bad part-- 1 screw-- took every bit of 3 min. to change

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Richard from Lancaster, PA

Cheese drawer rail broke

I took out the screw and removed the old rail, then I used the same screw to install the new rail. It took me 2 to 3 minutes. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: William from MIAMI, FL

Plastic drawer support had broken from extended use.

This was a truly easy snap-in repair. Because I live in a small fishing village on the coast of Venezuela, the only difficult part was waiting for the part to arrive. I'm very grateful that Part Select makes ordering parts easy and reliable.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Sandra from Standish, ME

Drawer rail under top shelf broken

It was easy. I handed it to my husband.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Chevy from Jacksonville, FL

The drawer support rail was broken

I unscrewed the old drawer support and screwed the new one in. It was very simple!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: April-Lynn M from Berrien Centere, MI

Drawer support was broken

Repair was quite easy. Simply remove screw and replace part. My repairman charges a min. fee of $99 to come by. I did this myself and saved an easy $100! The part came very quickly--next day after I ordered it. Would definitely do this again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Charles from Starkville, MS

Broken drawer slide

Unscrewed the broken piece; screwed in the new and re-installed the drawer unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Alan from Blairsville, PA

Both support rails had broken

First, remove shelf unit from refrigerator and lay glass side down on a large flat surface. Observe, then pay attention to assembly. Spent more time with this, drinking coffee, and playing with puppy, than the actual repair. Only had to remove and replace two
phillips head screws. Replace deli - meat drawer after shelf unit is in place in refrigerator. Check for clearance for door to close.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Screw
  • Drawer Support Rail - Right Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Robert from Pinckney, MI

The drawer support rail cracked and broke at the end

I unscrewed the old drawer support rail and installed the new one. The phone rep. was excellent. He listened to what I needed, looked up the parts for me, and sent me the correct parts the first time. I think the parts arrived within two days, much faster then I expected. I will be doing business with you again whenever I need parts. Thank you for your excellent service. You exceeded my expectations.

Sincerely,

Rob Ponitz

Help other customers find the most helpful instructions.

Were these instructions helpful?