430814-1-M-Frigidaire-240457701-Door-Closing-Cam.jpg
430814-1-S-Frigidaire-240457701-Door-Closing-Cam.jpg 430814-2-S-Frigidaire-240457701-Door-Closing-Cam.jpg 430814-3-S-Frigidaire-240457701-Door-Closing-Cam.jpg

Door Closing Cam

PartSelect Number PS430814

Sold individually. This cam is located at the bottom of the fridge/freezer door.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Clicking sound.
  • Unusual Noise.
  • Door won’t open or close.
  • Door sweats inside or outside.
  • Compare At

    $28.69
  • You Save

    $4.78
  • Your Price

    $23.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Hinge Bearing

Part Number 429803

Sold individually. Also known as a short door closing cam.

$6.77
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 33 reviews What's this?
31-33 of 33
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRussell from hampton GA

Door had a loud pop,and no longer closed on its own

piece of cake... removed upper hinge, old bearing hinge came right out ... Installed new piece and was done in less than 5 minutes... It took longer removing all the stuff from the door shelves,then it did to fix the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

Customerkarl from fallbrook CA

Door made "klunking" noise and would no longer swing closed on its own.

With a screwdriver, remove the hinge cover-plate on the top of the door. This reveals the two nut-driven screws that hold th top hinge-plate: remove while children/wife/neighbor/butler/out-of-work-political consultant hold the door. Take out the screw on the Bearing plate and replace with new. (I replaced, but kept the old one. Like to replace parts that ride on each other in pairs, even if there is no noticable wear. Next, take the old Bearing-hinge from the bottom of the door that whomever is holding. Needle-Nose Pliers might be handy if your bearing-hinge is also shredded. Re-assemble being careful to place the bottom hinge into the Bearing without catching or scoring the Bearing hinge. Don't want to do this again in six monthes.
While I was under there with the base/bottom plate removed, I noticed the dust and crud and vaccumed after replacing the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Socket set

CustomerRobert from willits CA

Drawer guides were broken & door was closing weird

Replaced the drawer cover/shelf. Took the door off & put in the new plate....simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-33 of 33