430027-1-M-Frigidaire-240351601-Door-Shelf.jpg
430027-1-S-Frigidaire-240351601-Door-Shelf.jpg 430027-2-S-Frigidaire-240351601-Door-Shelf.jpg 430027-3-S-Frigidaire-240351601-Door-Shelf.jpg

Door Shelf

PartSelect Number PS430027

Manufacturer Part Number 240351601
Manufactured by Frigidaire

This white bin can also be used on the freezer door on some models. Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $32.92
  • You Save

    $5.49
  • Your Price

    $27.43
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 32 reviews What's this?
1-15 of 32
 

459 of 461 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMONICA from LANCASTER CA

Freezer shelf broke

Easy slide it back in place

Help other customers find the most helpful instructions.

Were these instructions helpful?

123 of 195 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from Tierra Verde FL

Broke two door bins, one on frig and one on freezer doors

We had the bins the next day. I had called some other companies and they wanted twice your price! You were much more curteous on the phone, much more professional and quicker and cheaper! I will tell everyone in Florida who to call if they need a part!
Thank you so much!
Linda Cecil

Help other customers find the most helpful instructions.

Were these instructions helpful?

89 of 170 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTheresa from Salem NH

Replacing broken refrigerator and freezer shelves.

I simply slid both of the shelves onto the hinges on both doors. Perfect fit. Couldn't be happier with purchase. Site offers diagrams of appliance so it is easy to find needed replacement parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

75 of 137 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMitzi from Cedar Rapids IA

Broken door bin

Just slid into place provided.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 25 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTammy from Raleigh NC

The freezer door shelf fell off and broke

This process was so easy. I put in the model # and saw the piece I needed immediately along with a picture of it that helped me confirm it was the right one. All I had to do is snap the shelf in when it arrived.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 17 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDenise from Plainfield IL

Broken door shelf bin

Just snapped into place. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDan from Brooklyn NY

The bottom refrigerator door shelf bin broke.

The shelf bin is a piece that anybody can clip it on the door in less than 30 seconds. No tools required, just simple common sense.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerPhillip from Austin MN

Dryer motor would 'kick out' when starting up.

Unplugging the dryer and opening the front was just 2 screws and 2 bolts. I found the rear drums felt gasket was torn and folder over. This was pulling the drive motor down until it kicked out. So I removed the drum from the dryers housing and placed it on the floor. With a pliers gripped the felt and pulled it from the drum. With sand paper I cleaned the remains and then used clothe pins to hold the new gasket in place so I could glue it back onto the drum. After 5 minutes I removed the pins and remounted the drum. Using a butter knife to guild the felt from folding over, I turned the drum by hand once to ensure proper movement. The entire repair was done in 27 minutes alone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Spokane WA

Bins have been broken for several years

The parts arrived much quicker than expected. The parts were exact matches and they snapped into place within minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKeaton from Metairie LA

Door shelf bin holding clips broken/ cracked

lifted out the damaged bins and snapped in the new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerChris from Bakersfield CA

Hinge bearing shattered, and door shelf broke

Removed the top hinge from the door, removed the door, removed the doorstop and remains of the old bearing, and then replaced the items with the new ones in the reverse order. The screw I purchased was not needed.

The shelf had been broken for a while, and just needed to be slipped into the existing slots on the door

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRaul from Kissimmmee FL

Broken door shelf bin

put the new ones

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnthony from Tavares FL

Shelf bins had cracked with age

remove old shelves and put in new ones. Took about 2 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerChris from Albany OR

Put the shelves in

Shelves snapped right in in seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerRay from Millbrook AL

Crisper support was broke

Parts Supply had a YouTube video to show it was done. This is one of the best sites to get parts there is. Easy to use, tells you how to install them easily. Thanks Parts Supply, I'll be back whenever I need a appliance part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 32