| |
8 of 9 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMark from Colorado Springs CO
Meat drawer and support rails broken
I pulled the shelf unit out and removed the screw that held in each side. The old rails removed easily and the new ones installed just as easily. I put the shelf back in and slid the new meat drawer in and it was done - much to the delight of my wife. Parts Select has a great website. It was my first time and I read one of these with the exact problem I was having. I ordered the parts, which came quickly. Everything easy and worked great! I'm a happy customer.
|
4 of 5 people found this instruction helpful
Parts Used
-
- Meat Drawer Rail - Left Side - White
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJudie from Mendota Heights MN
The slide rail split on the meat drawer
All I did was remove the drawer, remove one screw. I took out the old slide, installed the new one and replaced the drawer. Quick and easy
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDoreen from Ormond Beach FL
Plastic guide rail broke
A plastic guide rail broke after the meat keeper drawer was left open and the refrigerator door was shut on the drawer, this has happened a few times over the last 6 years. We chose to change out both rails at the same time. We removed the meatkeeper drawer, then the shelf above as the rails are attached to the shelf. We removed the rails (one screw on each side. When the new rails came in, we replaced them with the screws. Super easy!
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTed from Hudson NH
The side rails on both sides of the drawer that holds the lunch meats were broken.
Pulled out the drawer, unscrewed the old rails, screwed inthe new rails. It was that simple. The hardest part of the job was removing the food items off of the shelf.
|
2 of 3 people found this instruction helpful
Parts Used
-
- Meat Drawer Rail - Left Side - White
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerAna from Laredo TX
The 2 rails that support the met taray brouke
The tracks that support the met tray broke because of excess of load.
There was a problem with the order:
The first order was for: PS429947 BLOCK (It was supposed to be the Left side Drawer Support Rail)
PS430126 Drawer Support Rail –Right Side
Then I order again under the same name, I ended up with 3 items the 2 Rails and the Block
In your first item drawing you don’t have item 42A
Besides that I am satisfy by your prompt service.
Ana Canseco / Eduardo Saucedo
anateresacanseco@hotmail.com / eduardo@saucedo.com
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKimberley from East Schodack NY
Broken drawer support rails
I took out the shelves that the supports were on and replaced the parts very easily. study it a moment before taking off the old and then snap on the new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customersam from Billings MT
Broken tracks
I just watched the online video and then did.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
Customerjoyce from vergennes, VT
The tray was out when the door w.As shut.It broke the tray and side arms
MY GRANDSON TOOK THE OLD SIDE ARMS OFF AND REPLACED IT WITH THE NEW.EVERYTHING WAS SO EASY AND QUICK. THANK YOU SO MUCH.
JOYCE
|
0 of 1 people found this instruction helpful
Parts Used
-
- Meat Drawer Rail - Left Side - White
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGary from Apache OK
Left drawer rail broke
The part was simple find on the website. Ordered part. But the wrong part was sent. I called them and they promptly refunded my money. Reordered the right part. And once received it took only 5 mins. Thanks to video on website. They saved me approx. 100.00. I tell all my friends about the website. The best site bar none. Now if they could do this for cars!!! I give partselect.com 5 stars.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDawn from lake in the hills IL
Drawer and track broken
I took out the drawer, then the whole shelf. I unscrewed the track that was broken and screwed in the new one. I then, put the shelf back in the fridge and put in the new drawer. All works awesome!!!
Thanks PartSelect for getting me the parts I needed so fast!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWhisper from Commerce MI
Broken meat drawer
Easy easy easy - take out the shelf above the meat drawer, unscrew one screw that holds in the drawer track, replace the drawer slide, rescrew and replace shelf. Couldn't be simplier... Parts also came very quickly.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerLanti from Boulder CO
Upper meat drawer broken and not supported, slid out with every opening
Removed the upper shelf and removed the old broken right and left support sides and replaced with the new ones, screwed in beneath the shelf. Replaced the upper shelf that holds the meat drawer and slid in the new drawer. Wonderful to have a functioning part in the refrigerator that still works great.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDeborah from Towson MD
Deli meat keeper tracks were broken
Extremely simple. I just pulled the shelf out of the fridge, unscrewed the two screws on each track side. Remember to KEEP the old screws because new screws are
not provided with the tracks. Just screw them in, replace the tracks, replace the shelf and slide in the drawer...
Done!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKathy from Bozeman MT
Drawer support rails were broken and bin on door was broken
The bin door shelf was easy, just snap it in.
For the drawer support rails, the hardest part of the repair was removing all the food from the shelf above the meat bin. Once that was complete, I took out the shelf with the drawer supports, unscrewed the rails from each side, inserted the new rail and reinserted the screw tightening the rail on each side. You can't put the rail in incorrectly since the screw holes will not line up. Very simple and easy.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerGlen from Shawnee OK
Both rt & lt. Meat drawer rails were broken.
I pulled out the meat drawer and then emptied the shelf above it. I took out the shelf with the rails attached to it. Then I removed the scre from both sides holing the rails in. I then removed both rails. I took out the spring and device for the cold air on the left side and installed them on the new rail. I then attache the 2 rails to the shelf and inserteed the screws that hold them in place. I put the shelf back in the refrigerator and put the meat drawer back in. I then put all the food back on the shelf.and was done. It was very easy.
|