| |
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customershannon from los angeles CA
Plasic door piece that holds in condiments broke
I just slid it right in and it worked!
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSandy from Edmonds WA
A shelf retainer on our refrigerater broke off.
well, the retainer broke off, so I waited for the new part to come, and when it came, all I had to do was put it on. putting it on took like a second. there were two hooks that the shelf hooked on, so it was really easy.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerConnie from Franklin IN
Grandkids had broken the top and middle shelf bins in my refrigerator door
I simply snapped the proper pieces in place. It was sooo easy!
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJesse from Edmond OK
My door shelf broke where the tabs connect to the door
I slid and locked the new shelf in place, easy!
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerErica from Harvey LA
Shelving groove breaks
It was so easy! I just slipped the shelving units in to the groove of the refrigerator, and it took approximately 2 minutes. I am so glad that I came across this company, because for the last 3 years I have tried to fix the shelving.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRichard from Floweree MT
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRichard from Glenwood AR
Shelfs broke
Replacing was to slide the shelf in on their stubs. My comment about the refrigerator shelfs is they are not made to last. You open the door and one end at the opening side would break. I check to see if it was hanging up however it has plenty of room. Rev. Richard Gibson, ADT
|
1 of 2 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTony from Glenview IL
My fridge needed a refrigerator door shelf retainer/bin.
I order my part from PartSelect and my item was delivered within two days. I just took my part and snapped it in the refrigerator door. It took less than a minute. Thanks PartSelect!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerJulie from Baton Rouge LA
Broken door bins
I took the door bins out of the wrapping, snapped them into place, and thus had a usable refrigerator once again! Tenants had broken four of the shelves in the freezer and fridge, and with this simple part replacement, it is good as new! Thank you!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customernora from elyria OH
Door shelfs cracked
It was so easy. I snapped the old broken ones off, and put the new ones on. Thank you for shipping the parts out so fast. I love you guys.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Refrigerator Door Shelf Retainer/Bin
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerEllen from Palm Harbor FL
Broken door shelf retainer
The Repair was as easy as one two three. Just unpacking the part and hanging it in the Refigerator Door. That was it. It fit perfectly and it took only 5 Minutes to fix.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerThelbert from Alton VA
Wear and tear
Super easy. It took longer to remove and replace the stuff in my fridge than it did to install the parts. Removing the top shelf makes it easier. One screw on the drawer support rail and the other two parts just snapped onto the door.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerElizabeth from Sheboygan WI
Replacing broken shelf and kickplate
Replacement parts snapped right on.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Coldwater OH
Replace door shelf bins
snap out old damaged bins, snap in new ones. Parts arrived amazingly fast. I returned one because I didn't need it. Just a few days later, confirmation of the accepted return arrived. Fastest service I've seen on the web.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerNicole from Palm Coast FL
Light socket broke
Thankfully I found this website and was able to understand how to find the part I needed and then install it. One you remove all the screws on the bottom the area where the socket goes is revealed, 2 screws to replace it, then you're done. I have light again, thank you!
|