429834-1-S-Frigidaire-240331502         -5A - Door Shelf Retainer Bar End Cap - Right Side
429834-1-S-Frigidaire-240331502         -5A - Door Shelf Retainer Bar End Cap - Right Side 429834-2-S-Frigidaire-240331502         -5A - Door Shelf Retainer Bar End Cap - Right Side 429834-3-S-Frigidaire-240331502         -5A - Door Shelf Retainer Bar End Cap - Right Side http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/JHZ55WMU.gif

5A - Door Shelf Retainer Bar End Cap - Right Side

PartSelect Number PS429834

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $3.58
  • You Save

    $.60
  • Your Price

    $2.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Shelf Retainer Bar End Cap - Left Side

Part Number 429833

$2.98
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 8 reviews What's this?
1-5 of 8
 

5 of 6 people found this instruction helpful

Parts Used

  • 5A - Door Shelf Retainer Bar End Cap - Right Side

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGeorge from Worcester, MA

Door shelf bar broke

This was a really simple repair. The hardest part was getting the broken piece of the plastic end cap out of the metal retainer bar. I had to use a small screwdriver to gently pry it out of the two notches in the retainer bar. Then I just slipped on the new part, and snapped the whole retainer bar into the fridge door and that was it.

If the end cap doesn't lock into place when you slide it into the metal retainer bar, you may need to bend the bar (gently) to get the notches around the plastic clips. You don't need a lot of force to do this since all you want is to lock the end cap in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerErik from Portland, OR

Broken shelves in the fridge

Just had to pop the old pieces out, assemble the new ones, and pop them in. Very easy. Anyone can do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerscott from sparkill, NY

Broken end cap in frigde and freezer

I slid off old caps, then slid on new caps. I pushed down metal holding clamps and I was finished. The whole process was about 5 minutes. The parts select web site was great. I looked up my parts on the easy to use catalog and ordered them. Make sure you save the broken parts or write down the part numbers to make finding your exact parts easier. I wish all parts web sites were as easy to use as parts select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customergarrett from Racine, WI

Mangled door rack

Remove and replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • 5A - Door Shelf Retainer Bar End Cap - Right Side

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerEvelyn from Cleveland, OH

End cap broke and retainer bar would not stay in place

Popped off the old and slipped on the new. No tools - in less than 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 8