Refrigerator Door Shelf Retainer Bar - Cut to Fit

PartSelect Number PS429820

This retainer bar is cut to fit.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $15.58
  • You Save

    $2.60
  • Your Price

    $12.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

6A - Door Shelf Retainer Bar End Cap - Left Side

Part Number 429667

It can be used for the left side of either the freezer door or the fresh food door.

$3.99
In Stock

Door Shelf Retainer Bar End Cap - Right Side

Part Number 429668

Sold individually.

$3.79
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 31 reviews What's this?
1-5 of 31
 

922 of 924 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

Tools

CustomerNancy from Pleasant Prairie, WI

Tenants had broken door brackets in fridge

cut brackets to size and snapped them into place with the caps purchased. I will continue to use PartSelect for all my appliance repair needs. Not only did I receive my order within 2 days but the cost was over half of what I have been paying for the local parts store to order for me. Thank you PartsSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

729 of 734 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerNancy L from Gainesville, FL

Retainer bar had broken from overloading the door with water bottles.

It took longer to remove the retainer bar from the packaging than it did to install it in the fridge.

Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.

Super easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

460 of 461 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerPaul from Oakdale, MN

Broken shelf-retainer bar and brackets

Put them together and (do this carefully, as they are light-duty plastic; the reason the originals failed) snapped them into place. Parts were factory-origninal, easy to figure out. Delivery time was exceptional, packaging great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

127 of 238 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerLori from Lawrenceville, GA

Broken shelving in frigidaire gallery side by side refrigerator and broken shelving in white westinghouse/frigidaire refrigerator

I snapped off the old, broken parts of the shelves and in the side by side fridge, I just popped on the new shelf. In the White Westinghouse freezer on top fridge, I had to remove (it snapped right off) the broken side shelf retainer bar end cap from the fridge and remove the broken piece piece of plastic from existing shelf retainer bar end cap that was stuck in the retainer bar. I used a letter opener to help get it out. Then I snapped the new door shelf retainer bar end cap into the bar, and snapped the bar end cap back to the door. Both repairs took less than 5 minutes..........and I am a female who isn't very handy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

42 of 57 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerDESMOND from BROOKLYN, NY

Broken shelf

snap in place

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 31