| |
4 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBrian from Dover NH
Wrong part
Call before ordering and confirm it is the right part.
|
4 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerROBERT from WARDENSVILLE WV
Broken refrigerator door bin
open refrigerator door unsnap & remove old bin. then just snap new bib in place. very simple.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAnna from Boca Raton FL
Door shelf bin was broken
It was so easy, I just lifted the old one off and the new went right into place. No tools needed.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customercatherine from houston TX
I cracked a refrigerator door bin
Not really a repair story, i only replaced a cracked refrigerator bin. This website is great for ordering replacement parts. I think this is the 2nd refrigerator part I've ordered from the site. Note to self: stop slamming the refrigerator door!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerThomas from Columbus OH
The shelf bin was broken
Just replaced the shelf bins and it was very easy and quick. The delivery was quick as well.Thanks
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPhillip from Plumerville AR
Frigidaire apparently had a defective lot of plastic when this model came out, as we have had to replace all the shelves and plastic tracks in this unit.
Take out old shelf install new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDeborah from Towson MD
Deli meat keeper tracks were broken
Extremely simple. I just pulled the shelf out of the fridge, unscrewed the two screws on each track side. Remember to KEEP the old screws because new screws are not provided with the tracks. Just screw them in, replace the tracks, replace the shelf and slide in the drawer... Done!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerDaniel from St Marys GA
Door bin broke and door bearing broke/wornout
with helper to remove door and lay flat to remove bearing with needle nose pliers. Popped out old and installed New one by pushing in. Reinstalled door and tightened small screws making sure door aligned properly. Replaced Door Bin.
|