Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS429724
Door bins, also known as cantilever shelves, are storage bins located on the door of your refrigerator. Over time, a cold refrigerator can cause plastic to become fragile and break down. This can then lead to possible issues that are easily fixed. A few issues that might arise that would require a repair are: the ice maker not producing ice, an unresponsive touch pad, leaking, loud noise, or issues with opening and closing the door. The repair is very easy and requires no tools. Simply lift and wiggle the bin to remove, line up the plastic mounts on the new bin, and snap into place.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
The shelf slides into the slots in the door
Help other customers find the most helpful instructions.
Were these instructions helpful?
ordered the part, opened the package, put the part on. it fit perfectly, loaded it with stuff and closed the door. Perfectly perfect
Pop out the old ones and put in the new ones. Super easy. Loved the Web Site, great pictures, and great speed of delivery. Will use you again
I just placed in the new shelf-very easy.Part select sent this shelf within 3 days of my ordering it. I would contact this company again.
Simply insert the replacement part. No tool is required.
The door bin was an easy fix, just slip the edges into the raised supports of the door.However, replacing the pegs which support the crisper bins, was a lot more difficult. Removing the old peg was not as easy as one might think. Because the pegs were broken, there was nothing to grab hold of. Having the replacement peg was helpful in determining how the old one was attached to the refrigerator wall. I needed to get a small blade screwdriver, and also a thin pocketknife blade, behind the base of the peg and wiggle them enough to get hold of it with the tip of needle-nosed pliers. The peg broke off in several pieces. Some I could remove by snapping them off and others had to be pushed in behind the refrigerator wall because there was no way to get hold of then. Once that was done, the new peg popped easily into place.
Easily installed the two new shelf bins. I ordered the wrong ones to begin with and the return process was absolutely fantastic. They were very helpful.
washed the shelves. Dried the shelves, and popped the shelves back into the freezer and refrigerator doors.Budda Bing
The repair was not more than snapping in two shelves...but the PartSelect service was another matter. It was awesome!! I ordered the parts on a Friday morning...and they were at the door by 2:00pm Saturday!!! Even for Ok City to Kansaas City...that was blistering speed! Thank-you.
Very easy. Just removed the old bins and slid the new ones into place. Very easy.
slipped it in place no problem. thanks
Took the part out of the package and snapped the part onto the refrigerator door.....did not even break a sweat.....
The replacement part simply snapped into place
Bins & handles popped right in place within seconds. The door handles were better quality than factory so I was highly pleased!
I have replaced two door shelf bins on my refrigerator and I bought both from you. The order and receipt of the bins were fast and I have been very satisfied with the service. I will use you as a source for any other appliance part that I might need in the future. Thanks for a very satisfying experience.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.