Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS429724
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
After sitting in a cold refrigerator for year after year, plastic becomes brittle and breaks. This is what started happening to my shelves and door bins. The problem a lot of times is getting the right part since some of the parts do not have numbers. This website gives a accurate description and best of all photos on an inch grid, so I can measure what I have and find what I need. This time everything was perfect and fit easily. took no time and just like that I have almost double the space again. Funny how that works. Once before I didn't get the right piece so just pay attention to the dimensions.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The new bins and I installed them in the door. Nice to have door space again.
Snapped both bins into place and it was fixed.
Remove cracked bins, inserted new bins and replaced broken glass shelf. less than 10 minutes....parts came in 3 days.....website showed actual part pics which helped choose the correct replacement.......it was great!!
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
We had the bins the next day. I had called some other companies and they wanted twice your price! You were much more curteous on the phone, much more professional and quicker and cheaper! I will tell everyone in Florida who to call if they need a part!Thank you so much!Linda Cecil
Replaced with new parts... they just pop right in. Cheap plastic used by manufacturer gets brittle with exposure to low temperatures and over a mere 5 years all break off. Very annoying.
Just slid into place provided.
Installed 3 new door shelves, took less in then 10 minutes. Yes, all 3 broke at once. The original shelves were cheap. The new ones from Parts Select feel a lot more durable.
Unplugging the dryer and opening the front was just 2 screws and 2 bolts. I found the rear drums felt gasket was torn and folder over. This was pulling the drive motor down until it kicked out. So I removed the drum from the dryers housing and placed it on the floor. With a pliers gripped the felt and pulled it from the drum. With sand paper I cleaned the remains and then used clothe pins to hold the new gasket in place so I could glue it back onto the drum. After 5 minutes I removed the pins and remounted the drum. Using a butter knife to guild the felt from folding over, I turned the drum by hand once to ensure proper movement. The entire repair was done in 27 minutes alone.
Opened the package- popped the shelf in- good as new!!!
The new bin arrived, I slid it in place and away we went.
I ordered 3 items based on my model and serial number from the website.
Item shipped Insanely Fast, ONE DAY.Item was installed in 15 seconds, faster than it took me to remove it from the box!
Snapped the shelf into place
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.