429668-1-S-Frigidaire-240311502         -Door Shelf Retainer Bar End Cap - Right Side
429668-1-S-Frigidaire-240311502         -Door Shelf Retainer Bar End Cap - Right Side 429668-2-S-Frigidaire-240311502         -Door Shelf Retainer Bar End Cap - Right Side 429668-3-S-Frigidaire-240311502         -Door Shelf Retainer Bar End Cap - Right Side http://www.partselect.com/Schematics/Frigidaire/JHZ55WMU.gif

Door Shelf Retainer Bar End Cap - Right Side

PartSelect Number PS429668

Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $4.34
  • You Save

    $.72
  • Your Price

    $3.62
In Stock
Order within the next 5 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

6A - Door Shelf Retainer Bar End Cap - Left Side

Part Number 429667

It can be used for the left side of either the freezer door or the fresh food door.

Order within the next 5 hrs and your part ships today!
$3.63
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 45 reviews What's this?
 

20 of 29 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set, Wrench (Adjustable)
Customer: Jerald from Phoenix, AZ

Ice maker water would constantly drip. Forming a huge block of ice.

Pulled refrig away from wall, shut off water supply. Removed two screws holding the old water value on the back of the refrig. Removed the two water lines from the value. Hooked water lines up to the new value and bolted the two screws and the new value on. Turned on water and pushed refrig back into position. Simple and it worked. No more huge blocks of ice. I have Cubes!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 14 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Crystal River, FL

Broken or missing retainer bars I butter dish

Took the old ones off and installed the new ones. Simple repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Jim from Kearney, NE

Shelf holders were broken along with end caps

The repairs were easy. The braces and end caps went together fairly easy. The freezer brace needed to be cut to fit but was easily done. 15-30 minutes was all that was needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Difficult
Time to do repair: More than 2 hours
Tools:
Customer: sadre from long beach, CA

Even though the pieces read one thing they did not fit

I ordered 2 bars, 1 for the freezer and 1 for the fridge area, both bars were too big. I am currently looking for someone with a bandsaw to cut these parts to fit the fridge. The 'left and right' caps are perfect though.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Stephen from New York, NY

Needed to replace door shelf retainer for freezer as existing end caps had broken

First removed existing damaged shelf retainer bar and end caps from freezer door. Next cut down new oversized retainer bar to size with hack saw. Then slightly opened up doubled over metal at each end of retainer bar with pliers and screw driver in order to create the small "nicks" that are needed to house the "bumps" that secure the retainer bar to end caps. Used tin snips for this. Next inserted new end caps and used pliers to crimp secure. Clipped in new assembly in freezer door.

Help other customers find the most helpful instructions.

Were these instructions helpful?