| |
0 of 1 people found this instruction helpful
Parts Used
-
- Door Shelf Retainer Bar End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSusan from Northbrook IL
End cap broke
Slip the endcap off the door--- no tools required for that. Use flat end of screwdriver to loosen the bracket holding the door bar into the endcap. The bar slides right out, is easily replaced, and the endcap slips right back on to the door.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerKathy from Hinesburg VT
Needed to replace the end cap on the bottom shelf of the fridge
First I had to remove the popsicle sticks and glue that had been semi-repairing the bracket for 1+ years. Then I popped it back together. Too easy.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Door Shelf Retainer Bar End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerRobert from Ventress LA
Broken rack railing on my refrigerator door
I found the part on PartSelect.com, ordered it, received it, and installed it in less than 3 days. Thank you PartSelect.com! I wish everything was this easy.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerClement from Santa Clara CA
Retainer bar was warpped.
Snap out the old, Snap in the new. With a "Special Needs" child at home, doors are slammed. Inside retainer bars take abnormal abuse .. Parts Select, "Saves the day" and I have a HAPPY Landlord.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Door Shelf Retainer Bar End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFRED from CHARLOTTE NC
Pice was not the same size
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLeah from Desert Hot Springs CA
Plastic parts broke on the door shelf
Snapped the new parts in.. and good as new!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Door Shelf Retainer Bar End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerKIRUBAKAR from CORONA CA
The leftside end cap broke and had to be replaced
Removed the broken piece and snapped in the new piece bought from PartSelect. Later connected the bar between the left end cap and right end cap. All done in few minutes. The new piece fitted well into the location with no issues.
Thanks PartSelect
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerDena from Gardner MA
All three door shelf retainer bars broken over course of two years
Snapped end caps on rails, snapped rails onto door. Regained large amount of useable space in refrigerator. Parts fit perfectly. Thanks.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerBruce from Rochester NH
The bottom shelf retainer bar on the door and both drawer support rails were broken and the knob and kickplate were lost
There's really nothing to tell about installing the parts on my refrigerator. Everything fit exactly like it was supposed to and the job only took abot 20 minutes. I was also impressed at how easy it was to find the parts on this website with just the model number.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSherry from Berlin MD
Broken shelves on the door
Ordered the right parts thanks to your list of part numbers and where they were located on the refrigerator. They fit perfect and problem fixed in five minutes. This is the best site I have ever used!
Please keep up the good service you provide.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRandy from Beaver Falls PA
Bottom door rail kept falling off, meat tray broken
snapped rails off of bottom door rail and replaced with new rail and supports, bottom rail and support was cracked causing rail to fall off very easily. works great now.
meat tray rail broken, fixed meat tray rail so we could be tray back into frig,
everything worked out great, parts arrived within 2 days from time i ordered them. just like new fridge.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerLinda from Houston TX
End caps were broken/missing on refrigerator
I installed new end caps brackets with bars by putting them in place. Now the refrigerator looks new again. These parts were installed in the door, which was broken/missing. This prevented a person from being able to store anything in the refrigerstor door until it was fixed.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLaurie from Carlsbad PA
Missing bottom door shelf bracket
Received 3 parts. Snapped them together. Attached them to fridge door.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customerdenis from Long Beach NY
Door brackets broken & or loose as well as as a draw guide
ordered brackets - epoxy glued all door shelf parts. When dried I snapped in place and then used self tapping screws to give added support to brackets to the door. Draw guide - replaced part and screwed in as directed.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerBrady from Ithaca NY
Refrigerator door shelf bars were broken
These were easy pop in pieces so no tools were needed. Very easy and quick. What I liked best about PartSelect.com was the pictures and labeling used in order to select the correct part. That was my biggest concern. It only took me about 15 minutes to find and buy the parts I needed.
|