| |
9 of 10 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerBrad from Kent OH
The hanging rails & meat pan runners were broken
1) The meat drawer and rails were damaged when my 7-year old son closed the refrigerator door while the meat pan was still extended.
2) I ordered the parts on-line using your easy to follow part search.
3) The items arrived 3 days later.
4) I used a phillips screw driver to remove the old rails & I attached the new rails (approximately 10 minutes).
5) I slid the front cover off of the damaged meat pan and slid it on to the new meat pan (approximately 3 minutes).
6) I slid the new meat pan onto the new rails.
7) I demonstrated to my son the importance of closing the meat pan prior to shutting the refrigerator door.
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLinda from Colchester CT
Both sides of the meat drawer hanging rails had been broken, and the drawer kept falling out.
First, I removed the shelf holding the meat drawer . Next, I used a screwdriver to remove the 4 screws that held the old rails to the shelf. Finally, I positioned the new rails and reinserted the screws into the holes and tightened. Less than 10 minutes and super easy!
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customered from carlsbad CA
Broken hanger
unscrew the hangers and replaced with the new ones. The parts were delivered in 24 hrs..amazing!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCarla from Frisco TX
A couple of the endcaps had broken off the bars that are on the freezer and refrigerator door.
First I removed the broken end caps that I had taped on. I then slid the end caps on the ends of the bar and simply snapped them onto the door. Voila!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Meat Drawer Hanging Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDEBORAH from BALTIMORE MD
My grandson pulled the drawer down,and broke the rail.
The repair took less then 15 minutes,my husband put the new rail on,he used a screwdriver,now I have a folder just for partselect/fridge.My
grandson is 4years old,and he can do some stuff.
Thank You
It came within 5 days.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJeffrey from Baltimore MD
Could not use the meat drawer as it kept falling off
I removed the screws that were in the original part that had a broken plastic endpiece on it. Put the new hanging rail on with the screwdriver and good as new!. I also replace some clips that were worn out and kept coming off when I put too much in the freezer doors. They were snap on so it took less than a minute to replace all 4 that I ordered. Now my refriderator and freezer work like it new and doesn't keep falling apart.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Meat Drawer Hanging Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJustine from Oxnard CA
The tip of the braket broke and would not longer hold the meat drawer
First, my husband removed the shelf assembly. Then he unscrewed the boken bracket. He then screwed in the new bracket and proceeded to install thecomplete shelf assembly back into the fridge. Placed the meat drawer back into correct location, to fit back into rail brackets. All done.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Meat Drawer Hanging Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSTEFANIE from Killeen TX
My drawer rail broke off on the right side.
The process of repairing the draw was very simply. First I removed the broken part with a screw driver and simply slide the new part on and secured the part w/ a screw and that was it.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Meat Drawer Hanging Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerThomas from Batavia IL
Meat drawer kept falling
I removed the screws from the old rail, which was broken, and installed the new rail using the old screws. It was very easy, and I wish I had fixed it months ago when it first broke.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDouglas from Clearwater FL
Broken plastic pieces
I just replaced the broken plastic pieces that I got from PartSelect. It was great and fast.
|