Quick Question!

Have you ever purchased from PartSelect.com before?

428074-1-S-Frigidaire-218470300         -Water Valve with Bracket
428074-1-S-Frigidaire-218470300         -Water Valve with Bracket 428074-2-S-Frigidaire-218470300         -Water Valve with Bracket 428074-3-S-Frigidaire-218470300         -Water Valve with Bracket http://www.partselect.com/Schematics/Frigidaire/KNHWINO7.gif

Water Valve with Bracket

PartSelect Number PS428074

This valve is intended for use with the ice maker in a refrigerator. The water valve supplies the water needed to make ice, so if your ice maker is not making ice or dispensing water, the issue could be that you have a damaged or faulty water valve. Before you decide to replace this part, turn the household water supply to this valve off, and remove the input tubing to see if it is clogged. If it is, clear the blockage to allow water back into the ice machine. Remember to disconnect the power and water supply to your refrigerator before beginning this repair.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, KENMORE®, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Ice maker not making ice.

Compare At

$44.74

You Save

$7.46

Your Price

$37.28
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1
 

11 of 15 people found this instruction helpful

Parts Used:
  • Water Valve with Bracket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: Kristi from Winfield, WV

Ice maker repair

The ice maker wouldn't fill with water. The maker itself appeared to operate but the tray would not fill. I ordered the part from PartSelect.com. The website allowed me to conveniently match a picture of the part with my part on the refrig. I ordered the part and it arrived in two days. I was impressed!

I turned the water to the ice maker off, unplugged the refrig. and pulled it out from the wall. I loosened and removed two screws with a nut-driver and unplug the wiring connection from the old part by simply pulling on it with my fingers. I then unscrewed the water connection from the old part using a set of pliers. The old part was then discarded. I connected the water and electrical and remounted the new part using the two screws. It was too easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1