427118-1-S-Frigidaire-218015501         -Drawer Support Glide - Left Side
427118-1-S-Frigidaire-218015501         -Drawer Support Glide - Left Side 427118-2-S-Frigidaire-218015501         -Drawer Support Glide - Left Side 427118-3-S-Frigidaire-218015501         -Drawer Support Glide - Left Side

Drawer Support Glide - Left Side

PartSelect Number PS427118

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $27.28
  • You Save

    $4.55
  • Your Price

    $22.73
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Support Glide - Right Side

Part Number 427119

$23.11
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLinda from Marlton NJ

Broken drawer side edges and supports

I was able to make the repair in very little time, took longer to empty the refrigerator and remove the broken pieces than it did to install the new ones. I originally ordered some incorrect items and was amazed at the quickness of receiving the correct pieces --- I have already recommended you to several friends and will definitely use you again should the need arise.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Cumming GA

Drawers and support brackets broken

removed good old clear plastic drawer fronts by prying loose with a screwdriver at the bottom of drawer.and sliding out upwards. placed old fronts on new drawers by sliding downward and snaping in place. removed old support guide using a nut driver and installed new one.removed both crisper drawer cover supports prying out with a screwdriver.pushed broken post of these supports back into the refrigirator wall with a flat punch.installed new supports and pushed locking post in with my punch and hammer. installed new cover storage pan.put in new drawers top and bottom with glass.about a 20-30 minute job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGraciela from san jose CA

Drawers support glide were broken and the side of the upper storage drawer was cracked

Very simple. I removed 2 screw each holding the old drawer support glide and I replaced it with the new support( 3 minutes to replace using old screws )
To replace the drawer I removed the front part of the drawer(just pop out) and I attached to the new drawer(no tools needed).
Now It looks I have a new refrigerator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3