Temperature Control Thermostat 5304496559

Hello Charles, thank you for contacting us. Yes, this part could be the issue with the inconsistent temperatures. You may also want to check the capacitor on the compressor, if this is starting to go it may not kick the compressor on when it should. This can be tested with a multi-meter. Hope this helps!

Hi Edwin, thank you for your question. We do have a general installation video that will show how parts like this one are installed most of the time. You can view that here: https://www.youtube.com/watch?v=FyAnn5-M0wI. I hope that helps. Good luck with your repair.

Hi Mike, Thank you for your question. If the freezer is too warm, you will need to check the evaporator fan motor and fan blade, the temperature sensor, the air damper and the defrost heater. If the ice maker is not dispensing ice, you will need to check the ice maker, the water filter, the ice dispenser solenoid and the auger motor. We hope this helps. Thank you and have a great day.

Hello and thank you for writing. It certainly sounds like it could be a faulty temperature control PS10057359 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Hello, Thank you for your question. You may wish to check the Temperature Control Thermostat-PartSelect Number PS10057359. That usually causes the unit to run to warm. We hope this helps.

Hi Rhidian, We do have a general installation video that will show how parts like this one are installed most of the time. You can view that here: https://www.youtube.com/watch?v=FyAnn5-M0wI. I hope that helps. Good luck with your repair.

Hi Marvin, thank you for your question. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.

Hello Joe and thanks for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. We do carry related parts for units just like yours. For example, part number PS735222 Good luck with your repair.

Hello Vaughn, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Hi Frederick, thank you for reaching out. According to our research, the issue is most probably related to the temperature control thermostat, part number PS10057359. We give you instructions that might help you replace the temperature control thermostat. First, turn off the power to the appliance. In the next step, unthread the screws attached to the access panel located on the bottom side of the freezer. Remove the thermostat knob with the help of a screwdriver if it does not come out by hand. Insert the screwdriver into the temperature control thermostat clamps and pull it out. Remove the metallic sensor attached to the tube. Install a new one and put all the parts back in their required positions. We hope this information is useful!