Quick Question!

Have you ever purchased from PartSelect.com before?

423802-1-S-Frigidaire-215846604         -Defrost Timer - 120V 60Hz
423802-1-S-Frigidaire-215846604         -Defrost Timer - 120V 60Hz 423802-2-S-Frigidaire-215846604         -Defrost Timer - 120V 60Hz 423802-3-S-Frigidaire-215846604         -Defrost Timer - 120V 60Hz http://www.partselect.com/Schematics/Frigidaire/ZLZZES93.gif

Defrost Timer - 120V 60Hz

PartSelect Number PS423802

This defrost timer is designed for use in your refrigerator. The defrost timer acts as a clock, that switches the refrigerator from the freezing cycle to the defrost cycle and back. If your refrigerator is running non-stop, or is not running at all, you may need to check and replace the defrost timer. This is a 6 hour and 21 minute defrost timer. This part is made of white plastic, with 4 metal prongs protruding from one end. To complete this repair, you will need to access the old defrost timer which is located inside the console on the roof of your refrigerator. To complete this repair, you will need a 1/4-inch nut driver, a flat blade screwdriver, and a Phillips screwdriver. Be sure to disconnect power from your refrigerator before you begin this repair.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Fridge too warm.
  • Freezer not defrosting.
  • Will Not Start.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1

7 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: Dennis from BEAUMONT, TX

Freezer freezing up and blocking the vent for refrigerator, not cooling the fridge.

Went pretty straight forward, except the heat shrink tubing was about 2 sizes too big. Would not shrink small enough to seal the connections. Even with a heat gun it would not shrink small enough. OH, another think is when I plugged the fridge back in the defrost timer was in defrost mode. Took me a few minutes to figure that out and use a screwdriver to turn the timer back to the on position. Other than that, install was pretty simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1