Door Shelf End Cap - Left or Right Side Specifications
The door shelf end cap, or door bin support, secures the rack in a refrigerator or freezer door. Note that this fits on either the left or right hand side. If the end caps of your refrigerator or freezer are broken or cracked, or if your food retainer bar is not staying in place, then replacing the door support can solve this problem. No tools are needed for this repair project. To repair, first remove the end cap by pushing upward or downwards to slide it out the end of the rail. Next, replace with new end cap and line it up to clip it back onto the rail. It comes in white and measures about two inches high. Remember to wear gloves for safety.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Door Shelf End Cap - Left or Right Side
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Tappan.
Part# 215473602 replaces these:
AP2111276, 441121, 215473601
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.7
Filter By Rating:
5 Stars
11
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marsha L - September 9, 2023
Verified Purchase
Little Part with a Big Job
The part works perfectly and does the job.
★★★★★
★★★★★
Teresa M - May 27, 2023
Verified Purchase
Great replacement!
This part was a perfect replacement for the one I had. Everything I’ve purchased from Parts Select has been great quality and exactly what I needed.
★★★★★
★★★★★
Thomas S - August 21, 2021
Verified Purchase
Great fit.
Very happy. Money saver.
★★★★★
★★★★★
Leslie F - November 23, 2019
Verified Purchase
The part fit great.
The part fit perfectly and I was able to install it myself.
★★★★★
★★★★★
Peter P - August 19, 2019
Verified Purchase
Works well!
The part fits perfectly! The refrigerator door access hole that it fit into was cracked, so I just put in a few screws to make it very solid and tight!
★★★★★
★★★★★
Michael P - March 20, 2019
Verified Purchase
Terrific Company
Easy web site to navigate. Part arrived in a speedy fashion. I would certainly use this site again.
★★★★★
★★★★★
Tom F - January 3, 2019
Verified Purchase
Did not fit
The part did not match the one on the other end of the shelf bracket, even though the refrigerator model number was a match. I had to glue the damaged one I had. The new part, with the $10 I spent on part and shipping, went in the trash.
Oh, well. The refrigerator is repaired well enough.
★★★★★
★★★★★
Mark B - October 30, 2018
Verified Purchase
Great
works great
★★★★★
★★★★★
Paul M - August 21, 2018
Verified Purchase
Door shelf end cap just what I need!
The part came in good condition and is just what I needed.
★★★★★
★★★★★
Dennis K S - July 11, 2018
Verified Purchase
SIMPLE
was what it was and did what it was designed to do. simple fix
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 19 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Freezer door caps
They were the wrong parts. I read a question another person asked and it advised to order these parts. Didn't want to waste my time anymore and threw them away.
Lisa from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End caps were broken, shelf bar kept falling off.
I unsnapped the old clips from the bar, installed one end cap to freezer door, clipped other end cap to bar, slid bar into end cap installed in door then snapped other end cap into place. Repeated for second shelf bar as those end caps were broken as well. No tools were needed.
Joseph from INDEPENDENCE, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My electric bill was super high. $450 for 1 month for a 1bdrm apt in NY city
I took a look at the web site where I purchased the parts, then I took a look at the paper enclosed with the order. Thankfully, I have a battery operated screw driver since there are so many screws. There are plenty of screws in my refrigerator and freezer doors. I thought that since my old door gaskets were all chewed up looking, if I
... Read more changed them, the 10 year old air conditioners and the old fashioned light bulbs to instant on energy saver light bulbs, the electric bill would become more manageable.
The refrigerator and freezer door gaskets were the first step. They were easy to swap out. You just need to empty the door of all food items, then pull back the old gasket to see the screws. There are alot of them. You should leave 2 loosened screws on each side of the refrigerator door to hold the panel in place while you work and remove the rest. Then you can remove the old gasket and slide the new one into place. Make sure as you tighten the screws and replace the ones you removed, the new gasket fits into the door panel groove securely and is in place as you tighen the screws. Make sure it is in place all the way around the door as you work. You repeat the procedure for the freezer using only one loosened screw on each side to keep the interior panel in place while you work. It takes some time due to the number of screws, but the work is pretty easy. I never even broke a nail.
The end caps for the shelf bars just snap into place just as the old ones can be snapped out with a bit of pressure. They do not have to be wrestled and you need to work carefully so that you do not break them. (I ordered an extra just in case, but I didn't need it. I will have it in case I need it in the future)
My electric bill dropped from $450 to $110 a month with all the improvements I made. Thank you Part Select for taking the fear of screwing it up, out of the repair process and making it manageable. I can afford my electric bill now. Thanks for your help.
The end caps worked perfectly for both the Frigidaire and Westinghouse fridges. Just pulled out the old end caps and then literally just pushed in the new ones (remember to attach the shelf bar before attaching the second end cap!). The pieces arrived quicker than expected. Thanks Partselect!
could not use the meat drawer as it kept falling off
I removed the screws that were in the original part that had a broken plastic endpiece on it. Put the new hanging rail on with the screwdriver and good as new!. I also replace some clips that were worn out and kept coming off when I put too much in the freezer doors. They were snap on so it took less than a minute to replace all 4 that I
... Read moreordered. Now my refriderator and freezer work like it new and doesn't keep falling apart.
refrigerator shelf guard kept falling off, causing everything to come crashing down
Simply popped the new end caps into place with the old guard and now it is tight and secure. Easy Peasy. Of course all this is after the operator at PartSelect ordered the right part for me; I had ordered the freezer door end cap, not what I wanted. I received the correct part the very next morning. Returning the wrong part was a breeze
... Read moretoo.
Read less
Kathryn from Anadarko, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door shelf end caps were broken
removed broken end caps, took a small screwdriver and simply applied a little pressure to release them. Pushed new end caps into place (they just snap in). Presto done!!
clips on both end caps we broken and the crossbar kept falling off.
First i pulled the crossbar off the door, then I pulled both end caps off the crossbar and then I put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
Frank from Orange Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
June 4, 2019
I need to order two door shelf brackets and the diagram for this model shows the part as #5. However, there are two part numbers listed. Do i need ps422925 or ps422444?Thanks in advance for your assistance
For model number TRT18GREW5
Hello George, thank you for inquiring. Part PS422925 is for the fridge Door Shelf Retainer Bars and part PS422444 is for the freezer Door Shelf Retainer Bars.
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 19, 2019
I am looking to order shelf end caps for the freezer door section.Is the correct part number 215473602 or 215267701?
the diagram shows the correct item as 5a, but both these items are listed as 5. please advise. thank you for your help.
For model number 25369802892
Hello David, Thank you for your question. Based on the model provided, our parts list shows 5A in the list as part number PS422925. Have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
