421062-1-S-Frigidaire-154376501         -Lower Rack Bracket
421062-1-S-Frigidaire-154376501         -Lower Rack Bracket 421062-2-S-Frigidaire-154376501         -Lower Rack Bracket 421062-3-S-Frigidaire-154376501         -Lower Rack Bracket http://www.partselect.com/Schematics/Frigidaire/ZENZB1HK.gif

Lower Rack Bracket

PartSelect Number PS421062

This white lower rack bracket is a little over an inch long. Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $31.67
  • You Save

    $5.28
  • Your Price

    $26.39
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 9 reviews What's this?
1-5 of 9
 

7 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: H Jean from Columbus, OH

Upper rack had rusted and needed to be replaced

I pulled out the upper rack and using pliers, unlatched the snap brackets on each side. I removed the upper rack, and while I held the glides still, my husband slid the new rack onto the glides. I then replaced the snap brackets and we were back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Mark from West Linn, OR

Installed springs, linkage, gasket, and bracket

Repair was easy. Unfortunately I really didn't need the springs or linkage, but I couldn't see that until I took the dishwasher out from the counter. The springs were not stiff enough to keep the door from just falling open. So I cut about an inch off the long end and bent it into a hook. I didn't need new linkages the old ones were fine. The gasket made the biggest difference and went in very easy. The door will be difficult to close for a few times then everything works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Lower Rack Bracket
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools:
Customer: william from jefferson city, MO

Missing lower rack rollers

Bought the part and snapped it into place

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
  • Lower Rack Bracket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Phyllis from Washington, DC

The plastic pieces holding the rack broke

The plastic pieces holding the section of the rack that folded over broke. I just unsnapped the rack, removed the remaining parts of the broken rack snaps that were still attached, and slid the new pieces on. It took me an extra minute to figure out which direction the rack should be turned, but then it snapped on easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Lower Rack Bracket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Laura T from Watsonville, CA

Hinged lower rack dish separater

I had saved the older broken part and used the new pieces in matching the old pieces. VERY EASY

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 9