421062-1-S-Frigidaire-154376501         -Lower Rack Bracket
421062-1-S-Frigidaire-154376501         -Lower Rack Bracket 421062-2-S-Frigidaire-154376501         -Lower Rack Bracket 421062-3-S-Frigidaire-154376501         -Lower Rack Bracket

Lower Rack Bracket

PartSelect Number PS421062

This white lower rack bracket is a little over an inch long. Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $30.06
  • You Save

    $5.01
  • Your Price

    $25.05
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 9 reviews What's this?
1-9 of 9
 

6 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerH Jean from Columbus OH

Upper rack had rusted and needed to be replaced

I pulled out the upper rack and using pliers, unlatched the snap brackets on each side. I removed the upper rack, and while I held the glides still, my husband slid the new rack onto the glides. I then replaced the snap brackets and we were back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Rack Bracket

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPhyllis from Washington DC

The plastic pieces holding the rack broke

The plastic pieces holding the section of the rack that folded over broke. I just unsnapped the rack, removed the remaining parts of the broken rack snaps that were still attached, and slid the new pieces on. It took me an extra minute to figure out which direction the rack should be turned, but then it snapped on easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lower Rack Bracket

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura T from Watsonville CA

Hinged lower rack dish separater

I had saved the older broken part and used the new pieces in matching the old pieces. VERY EASY

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerMark from West Linn OR

Installed springs, linkage, gasket, and bracket

Repair was easy. Unfortunately I really didn't need the springs or linkage, but I couldn't see that until I took the dishwasher out from the counter. The springs were not stiff enough to keep the door from just falling open. So I cut about an inch off the long end and bent it into a hook. I didn't need new linkages the old ones were fine. The gasket made the biggest difference and went in very easy. The door will be difficult to close for a few times then everything works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lower Rack Bracket

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRichard from Dayton OH

Bowl holder on lower rack collapsed into folded position when bowls were loaded.

Very simple: snap out old brackets and snap in two new ones. Biggest problem was finding parts, and your website made that EASY! I'll be back next time I need parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLucette from Lutz FL

The plastic handle broke off the door latch and the brackets broke so someone threw out the fence.

First I removed the six screws from the door panel, then I removed the old door latch assembly, there were two torx screws and four electrical connectors. I reattached the new electical connectors and screwed it back in place. Then I put the door panel back on with the screws. It was easy, my husband thought I would not be able do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lower Rack Bracket

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

Customerwilliam from jefferson city MO

Missing lower rack rollers

Bought the part and snapped it into place

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAndrea from Bellevue WA

Missing parts

Took out lower rack, snapped new peices into place. Perfect fit, easy to install, made all the difference in the world!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lower Rack Bracket

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Trinity TX

New units were exact replacements and fit nicely

Easy, just removed old unit and reinstalled new units.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-9 of 9