420961-1-S-Frigidaire-154362809         -Control Board
420961-1-S-Frigidaire-154362809         -Control Board 420961-2-S-Frigidaire-154362809         -Control Board

Control Board

PartSelect Number PS420961

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $105.66
  • You Save

    $17.61
  • Your Price

    $88.05
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 7 people found this instruction helpful

Parts Used

  • Control Board

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerJames from Saugerties NY

Cotrol board shorted out and burned up some wire connections.

Had to replace control board Part#:PS420961 on my Fridgidaire dishwasher. It shorted out and started to smoke. Thank god I was home. Had to turn power off at the breaker first thing. Removed the front control panel and cover. Unscrewed control board cover. Disconnected all terminal ends. (be careful here, the clips for the plugs snap easy and the one band wire just pulls up a little bit so you can remove it!) I took a picture with my phone for reference. Had to cut off two burned terminal ends, strip wires back, and crimp on new ones. I suggest using shrink wrap on them. I then pluged everything back in there spots and reassembled. I crossed my fingers and tuned breaker back on. Hit the start button and she fired right up! All good so far. Good luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKeith from Wakefield RI

Relay clicking and wash cycle frequently interrupted

Unscrewed the front panel and removed the control board cover. Carefully disconnected the wiring harnesses from the defective control board and connected the new board. Replaced the cover and front panel and it was ready to use.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2