2 of 4 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
CustomerMark from West Linn OR
Installed springs, linkage, gasket, and bracket
Repair was easy. Unfortunately I really didn't need the springs or linkage, but I couldn't see that until I took the dishwasher out from the counter. The springs were not stiff enough to keep the door from just falling open. So I cut about an inch off the long end and bent it into a hook. I didn't need new linkages the old ones were fine. The gasket made the biggest difference and went in very easy. The door will be difficult to close for a few times then everything works great.
0 of 1 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerDaniel from Belleville IL
Right hand door spring broke/made door feel really heavy
Slid dishwasher out from under counter about six or eight inches. I was able to see where to attach the new spring and linkage. There are many holes in the base of dishwasher so that you may adjust the door balance by choosing a different hole. I used the same one on the right side that was used on the left side and it just balances perfectly. Slid it back in and attached the screws at the top and adjusted the feet with a 3/16 socket and small rachet;took about 30 minutes.