Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
February 2, 2018
Hi I have a question about installing this part. When you tighten the screw where the drip loop wire clamp connects should you let it turn and touch the detergent dispenser or should there be a gap between the two parts? I just removed mine but didn't see if it touched the dispenser. Thanks for the help, Kevin.
For model number FGBD2435NB0A
Hi Kevin, Thank you for the question. You will need to tighten the screw until it is tight enough without stripping. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
February 2, 2018
Hi, my question on this part is should you let the clamp turn with the screw and touch against the corner of the dispenser or should you stop it from touching with your finger? I think when i took it off it looked like the rubber on the clamp touched against the detergent dispenser. Thanks, kevin.
For model number FGBD2435NB0A
Hello Kevin, thank you for your question. The clamp should rest against the dispenser, but not too tightly to score the plastic. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
