http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/V60CKUUA.gif
See part 59 in the diagram

O-Ring - Rear

PartSelect Number PS420466

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $30.36
  • You Save

    $5.06
  • Your Price

    $25.30
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

O'Ring - Front

Part Number 420467

$25.30
In Stock

Pump/Motor Kit with Harness

Part Number 3501031

This part has been redesigned by the manufacturer and may appear different, but will function the same. This kit helps propel the water through the spray arms. Motor can also be ordered separately.

$166.85
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.7 / 5.0, 3 reviews What's this?
1-3 of 3
 

24 of 41 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerJohn from Herndon VA

Replaced dishwasher motor

Single-handedly. Tipped dishwasher on its side for easy access to water and electric connections. Went back together with no problems or leaks, washes quiter than ever.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 13 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set, Wrench set

CustomerLarry from EDWARDS CO

Water leak behind kick-plate

Water had been dripping for quite some time causing the floor boards to warp and buckle causing the door to no longer align. Water drip could be seen coming from the motor area. Ordered the O rings and replaced. Get Motor & Pump schematic Pub to visualize how parts fit together. I recommend getting motor (~$90)which comes with O rings (~$50 for O rings alone) because, as it turns out, the leak was in motor. I will post repair process in separate posting.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers, Wrench(Adjustable)

CustomerMarshall from Beaverton OR

Noisy, vibrating pump

After moving the dishwasher out from the cabinetry, I removed the screws holding the pump in place. Pulling the pump from the formed plastic opening, I found a toothpick lodged in the pump housing. At the same time I noticed that the front o-ring was deformed due to being the incorrect size (too large). It was installed at the factory this way.

I went online to search for new parts. PartSelect was the second or third listing on the search page. I submitted the dishwasher model number and was taken to a set of parts illustrations. I was easily able to find the o-rings I needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3