This plastic cover and stem assembly helps hold the lower spray arm in place.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Lower Spray Arm Support
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 807145201 replaces these:
AP5948918, 154245501
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.8
Filter By Rating:
5 Stars
10
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas C - April 6, 2023
Verified Purchase
Easy repair
Part fit perfectly
★★★★★
★★★★★
Richard K - May 11, 2021
Verified Purchase
what the doctor ordered
part a perfect fit - washer back to full operating status.
★★★★★
★★★★★
Jason C - April 19, 2021
Verified Purchase
Works perfect. Easy to install
I was having issues with the lower spray arm coming loose. The "ears" were worn on this piece and the new support has eliminated the problem.
★★★★★
★★★★★
Robert T - November 6, 2020
Verified Purchase
Exact replacement. Install video made it easy.
Part arrived on time saved major expense by doing it myself!
★★★★★
★★★★★
C M - July 11, 2020
Verified Purchase
Great Paart
New part was exact replacement. Very easy to install
★★★★★
★★★★★
Bruce J - June 26, 2020
Verified Purchase
Easy Fix.
could not have been any easier. Easy identification of part. Reasonably priced and fast delivery. Even a video to show how to replace.. Could not ask for more. thanks
★★★★★
★★★★★
Terrance D - April 28, 2020
Verified Purchase
It fit my dishwasher
The part must have been an updated part I had to slightly modify the part to get it to fit just right.
★★★★★
★★★★★
David K - February 28, 2019
Verified Purchase
Manufacturer OEM Part - Works great
This is an updated part from the manufacturer, replacing the one that came installed on the dishwasher. I can tell that they redesigned the weak points that were present on the old part, so I anticipate this one lasting longer than the one it replaced.
Install was an easy 3 screws. Make sure to get the float ball replaced in the right spot before installing this part, though.
★★★★★
★★★★★
Joel H - October 29, 2018
Verified Purchase
Easy to replace and fixed the issue
I saved hundreds of dollars by replacing this part on my tenant's dish washer rather than replacing the whole unit. The little tabs at the top had worn down so the spinning piece would not lock in. Once replaced with this part it clicked in and the spinner no longer came off and the tenants report their dishes are also cleaner.
★★★★★
★★★★★
Laura A - August 22, 2018
Verified Purchase
Part worked perfectly
Part was reasonably priced, arrived in a timely manner and fit perfectly.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Making noise during operation.
Checked your videos and found the lower spray arm damaged (nubs worn down). Previous owner had some work done and didn't reinstall the parts properly. While during the repair, I also decided to replace the Detergent Dispenser and make a new spray shield. I guess the previous owner decided one wasn't needed.
The repair was not the problem. The problem was getting the parts I ordered. When the parts finally shipped I had to wait for them because they just sat in a FedEx shipping warehouse for about a week delaying the repair.
This was pretty easy. It was a guess as to the problem, but there much debate , if the water isn't moving it had to be the pump, right?. So i replaced the circulation pump. 2 screws on the top and two trim screws on the bottom, and it slides right out. Then UNPLUG IT.. Take the screen out of the bottom on the inside and make sure yo
... Read moreu get all the water out or it will end up on the floor when you tip it on it's side. The directions were ok, i looked over them briefly but didn't use them. tools were, phillips srewdriver, torx driver (pump bracket srews) wire stripper/crimper (for the plug adaptor) and a heat gun, (for the heat shrink tube for the crimp connection). Overall it was pretty easy. the pump was made to be easy to replace. 45 min and back in action.
After several years of use and cleaning the small "nubs" that held the locking peice on the assembly under the jet arm had worn off. This allowed the whole thing to spin and the dishes weren't getting clean. Finding the part on the site was easy, it arrived amazingly fast and all is up and working great. I have used Parts Select 2 or 3 t
... Read moreimes in the past and have always had the same great results. Saved me a bunch in repair bills. Thanks
Read less
Peggy from Minerva, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A small knob on the Cover and Stem Assembly broke allowing the lower washer arm to fall off every time the dishwasher cycled.
This is probably the easiest home repair I have ever done! I simply lifted out the screen exposing the Cover and Stem Assembly. It was held on by three screws. I removed the screws and lifted off the old part. (It had been there for over 10 years so I had to push a little to free it.) I then replaced it with the new part and replaced
... Read more the three screws. It now works fine. One of those home repairs that is so simple but makes it look like you know what you are doing!
Read less
Wm from Gurnee, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wife noticed the spray arm was not connected.
After removing the 4 torx head screws the cover and stem assembly was removed. The new piece was installed and screws were tightened. That is all it was to it. A very simple repair! Thanks. D.W.Daniels
David W from Reidsville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic tabs broke
Replaced the part and everything worked fine
Niklas from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom spinner wouldn't stay on
VERY simple---unscrewed three screws on the broken part (the little nubs that held on the bottom spinner were broken off), screwed the new one back in, re-attached the spinner.
I was VERY pleased with the customer service and quick shipping (ordered on Sunday night, the part was delivered Wednesday morning). I would definitely
... Read more recommend this site to anyone, and would use it again. Five Stars!!!!
Read less
Kathey from Humboldt, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom Spray Arm Did not Turn
The bottom spray arm would not turn or fall off the stem assembly, so the dishes would not come clean like usual. The spray arm connects to the stem assembly via two plastic prongs that secure the spray arm. I removed the spray arm from the socket (no tool required) and observed the prongs had worn completely away. I grabbed the power scr
... Read moreew driver and removed the assembly (3 screws). I placed the new assembly in place, secured the screws, and attached the spray arm. Finished.
Read less
david from hull, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robbin
January 23, 2023
Water will not drain. What parts will I need
For model number LFID2426TF1A
Hello Robbin, Thank you for your inquiry. Researching the model number you have provided, we would recommend checking the following parts: the drain pump, the drain hose and the drain filter. Check the hose and filter for any debris or restrictions and clean if needed, and you can test the pump with a multimeter. Good luck with your repair.
I wanted to make certain that this part will fit my dishwasher as the part numbers do not match.
For model number FDB520RHS0
Hello Jessica, thank you for your question. Yes, this Support PS9865072 is the correct one for your model. Good luck with your repair.
Was this helpful?
Thank you for voting!
Mat
March 9, 2023
My dishwasher is FDP750RCS0 .
The part Lower Spray Arm Support Part #: PS9865072
suggested for my dishwasher looks different,
The side with 2 screws seems to go further and appears differently shaped.
Is this the correct part?
For model number FDP750RCS0
Hi Mat, thank you for reaching out. According to our research on your model, the lower spray arm support, part number PS9865072, is compatible with your model. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
