Quick Question!

Have you ever purchased from PartSelect.com before?

420361-1-S-Frigidaire-154234401         -Hose
420361-1-S-Frigidaire-154234401         -Hose 420361-2-S-Frigidaire-154234401         -Hose 420361-3-S-Frigidaire-154234401         -Hose http://www.partselect.com/Schematics/Frigidaire/V60CKUUA.gif

Hose

PartSelect Number PS420361

This hose is use to connect the drain pump to main pump housing hose.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $39.49
  • You Save

    $6.58
  • Your Price

    $32.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

10 of 14 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: JOHN from LA QUINTA, CA

Water not draining

the pump was making some loud noise so i removed the bottom cover and the drain pump is right in the front the motor was hot the washer had water on the bottom so i started the washer hit the pump with a screw driver handle to get it started drained the water and used pliers to in still. not bad at all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Theodore from Salisbury, NC

Fin in pump broke

pulled out dishwasher ,left lines hooked ,started cicle .heard pump.took apart.seen problem. order new one ,works like new..

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench set
Customer: Craig from Fairway, KS

Water leak and broken latch

We knew the latch was broken, but operational if you held it just right. I disconnected the water line and electricity to slide the dishwashwer out from the cabinet. Determined that hose had been chewed through by a mouse. Ordered the parts. when they arrived, changed the hose, slid the dishwasher back into place and tested. No leaks. then removed 6 screws to remove the face, 2 more screws and the wires to remove the broken latch, reversed the processed to replace and replaced the old seal. Loaded the dishwasher and it works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3