420038-1-S-Frigidaire-154174501         -Lower Rack Roller with Axle
420038-1-S-Frigidaire-154174501         -Lower Rack Roller with Axle 420038-2-S-Frigidaire-154174501         -Lower Rack Roller with Axle 420038-3-S-Frigidaire-154174501         -Lower Rack Roller with Axle http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/2VUB8M6A.gif

Lower Rack Roller with Axle

PartSelect Number PS420038

Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $9.26
  • You Save

    $1.54
  • Your Price

    $7.72
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 21 reviews What's this?
1-5 of 21
 

511 of 517 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set

CustomerCHRIS from ROANOKE, VA

Water leaking from inlet valve

Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring.

Help other customers find the most helpful instructions.

Were these instructions helpful?

362 of 364 people found this instruction helpful

Parts Used

  • Lower Rack Roller with Axle

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerSandra from Mount Vernon, WA

Lower rack roller missing

Took the roller out of the package, snapped it into place. Less than 15 seconds. Works good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

90 of 157 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerShuaib from Hollywood, FL

My door would not close, so I could not turn on the dishwasher.

It was simple, I do have extended warranty from AHS, but they charge me a trip charge of $55 per repair, and then all parts and labor is covered. But when I checked with Parts Select the parts costed me about $10, so I decided to do it myself.

While I was at it, I also bought other parts and updated my dishwasher with some upgrades.

Good place to buy any parts from, they are very helpful, if you do not know your parts. They even had drawings of my dishwasher, and this actually helped me find what kind of other parts I could buy to upgrade my dishwasher.

Parts select is on my favorites list and pass it on to all my friends.

Help other customers find the most helpful instructions.

Were these instructions helpful?

81 of 142 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerSUSANNE from Burlington, NJ

The latch broke on my dishwasher and one of the rollers went missing

The repair was extremely easy!!!!!!!! All I had to do was unscrew the 6 screws on the inside of the door panel. After that I had to unscrew the 2 screws that attached the latch to the panel. Once they were off I just pulled off the 4 wires from the old latch and slid them back on the corresponding metal "tongs" of the new latch. I attached the latch to the panel with the 2 screws. After that I pushed the panel back onto the door and screwed the 6 screws back in......voila.....all done(-:

Help other customers find the most helpful instructions.

Were these instructions helpful?

68 of 130 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerPeter from Port Barrington, IL

Lower rack wheel replacement

Popped the old melted wheels off and simply clicked the new ones into place. It took less than 2 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 21