This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Gibson, Tappan, Kenmore.
Part# 131719100 replaces these:
AP2107515, 408125, 131063200, 5303291433
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
October 1, 2017
The washer will fill with water, it will pump all water out,it will spin great. But it won't wash. There is no humming sound from the motor, no burnt smell. The door latch is fine (if that was it, it wouldn't work on spin either ? I'm guessing) after it fills with water it just stops no noise like you shut it down. You can push the control knob in, turn it to the wash cycle, pull control knob back out but the washer will not start. Push control knob back in, turn it to the spin cycle, pull control knob back out and it drains & spins great. Just won't wash. What is wrong? I was thinking the washer timer but it's a $170.00 bucks and there is no refund on this parts so I'm hesitant to buy it. Because I'm not sure. Will the washer spin if the motor is bad? Thank you for your help,Tim
For model number GLET1031CS0
Hi Tim, Thank you for the question.Everything seems to be pointing to the timer being the issue. I suggest testing the timer with an Ohm meter. You can pick one up at your local hardware store of you do not have one on hand. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roger
January 7, 2018
I recently bought a new timer for this dryer but it only has 7 connectors whereas original has 8 connectors: Both old & new timers carry reference m460g and part n° 131063301e (old) n° 131719100 (new)
Wiring schematicfor dryer is p/n 131033100d
Viewing clockwise from top left on connectons side :Original old timer has 8 connectors:
c, b, a,
t2,
h
td
tm, ad
new timer has just : 7 connectors:
c, b, a,
h
tm, x, r
how to connect?
i tried switching out the timer motors to see if problem was motor itself - no improvement in function.
can you advise how to connect theis new timer? thanking you in advance for your input roger cooer
For model number DE600A (DE68VSXE3)
Hello Timer, Thank you for your inquiry. Although we do not have a video or wiring instructions for this part, I was able to find the following information. For this timer the connections will be the following, Red and black wire will go to terminal B. Purple will go to terminal S, single black will go to Terminal C, Brown will go to terminal H, White will go to TM, Tan will go to terminal X and orange will go to terminal A. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Amando
March 1, 2018
Dryer won't start or stop where its suppose to
For model number NMER336FS0
Hi Amando, Thank you for the question. if the appliance is skipping cycles you will need to test or replace the timer switch. Hope this helps!
Was this helpful?
Thank you for voting!
Tracey
May 4, 2023
I have a stackable washer and Dryer. Everything works great except the dryer timer does not work. I set it for 60 min. and it dries fine but the knob stays the same. It turns off when I open it. I can turn the knob no problem to other settings and the same thing. Never turns off unless I open it!
Also, How do you find how old my unit is?
For model number FLSE72GCSA
Hello Tracey, thank you for the query. Based on our research, you may need to replace the dryer timer, part number PS418620, to fix the issue. Your model was manufactured approximately in 2003. To get the exact date, please provide us with the serial number. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
