Quick Question!

Have you ever purchased from PartSelect.com before?

418433-1-S-Frigidaire-131658800         -Door Catch
418433-1-S-Frigidaire-131658800         -Door Catch 418433-2-S-Frigidaire-131658800         -Door Catch 418433-3-S-Frigidaire-131658800         -Door Catch http://www.partselect.com/Schematics/Frigidaire/ZHGITR3L.gif

Door Catch

PartSelect Number PS418433

The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door to stay secure. Before you begin this repair make sure to disconnect the power supply to the dryer. The tools you will need for this installation include a Phillips screwdriver and a small flat blade screwdriver. A pair of pliers may also come in handy. Users ranked this repair as easy, and say that it will take fifteen minutes or less to complete.

This part works with the following brands: Frigidaire, Kenmore, Gibson, Kelvinator, Tappan, Westinghouse, Crosley, Electrolux, Uni.

This part works with the following products: Dryer, Washer Dryer Combo, Range.

This part fixes the following symptoms:

  • Door won’t close.
  • Will Not Start.

Compare At

$34.19

You Save

$5.70

Your Price

$28.49
Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Strike

Part Number 455020

The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair that should only take a few minutes to complete. The package contains one strike. Open the dryer door, and use a flat head screw driver to snap the old strike out if it has not fallen out already. Simply push the gasket out of the way, squeeze together the strike and place inside of the opening. Wiggle to ensure it is set in place properly.

Order within the next 11 hrs and your part ships today!
$8.47
In Stock

Door Latch Kit

Part Number 475419

The door latch is designed to keep your dryer door closed, even during the drying cycle. If your dryer door will not stay closed, the drying cycle might not start, or it could stop suddenly. If you notice this is happening, check the latch itself for any physical damage. If you notice that it is damaged, the latch should be replaced straight away. This genuine OEM part is compatible with different brands and models, so check to make sure it will properly fit yours before ordering. This door latch kit comes with both the strike and the catch. We suggest replacing both parts of the door latch at the same time.

Order within the next 11 hrs and your part ships today!
$2.94
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 10 reviews What's this?
1-10 of 10
 

471 of 475 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Glenda from Covington, LA

Hinges had broken over time

easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

29 of 41 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Bruce from Seminole, FL

Door latch & door strike broken on dryer

I removed the broken door latch & strike with pliers. Then I pushed the new parts into place

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 22 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michelle from Dallas, TX

My husband ruined the old latch by trying to shut the door too hard, and the old latch fell down into the inside of the dryer.

I took the new latch out of the package and snapped it into place. It took about 15 seconds, and that included the walk to the laundry room!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dustin from Edmonds, WA

Door won't close

. Supper easy I can't beleive it was over $20 for a little peice of plastic!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Karl from Nanuet, NY

Dryer would not heat up

First I removed two screws holding a bracket that keeps the two ignition coils in place and removed the wires to the two coils. I replaced the old coils with the new coils, re-attached the wires and re-secured the bracket. I also replace the door catch simply using a flat head screw driver to remove the broken catch and pushed in the new catch. The Lint Screen is a simple replacement requiring no tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 7 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Bonnie from Saint Augustine, FL

Dryer door part broke

Dryer door would not close, part had broke and fallen in. Once part was received it took less than an minute to put the new one in and I was back in business.

thanks for making it easy to find the part needed. and the delivery was fast!

bonnie J.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: karen from aurora, IL

Dryer door wouldnt close

the catch on the door was worn and cracked.... so I noticed it could be easily popped out with a screw driver and when the new part came in the mail 2 days later, it was just as easy to pop back in with no tools required. Now the door stays shut really good!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tammy from St. Peters, MO

Female part of door clasp broke

All I did was push the new part into the machine! So easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: chris from dallas, TX

Latch on dryer no longer worked

So easy! I ordered the part on the website. Received it 24 hours later. And popped it in place. Good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Debra from BROOKLYN, NY

Just popped the part I ordered right in and it's was closing in no time !

Just opened package and popped the part right in!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-10 of 10