Door Catch

PartSelect Number PS418433

This part helps keep the door closed while the machine is running.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door won’t close.
  • Will Not Start.
  • Compare At

    $30.22
  • You Save

    $5.04
  • Your Price

    $25.18
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Strike

Part Number 455020

"Male" piece of a dryer door closing mechanism.

Order within the next 12 hrs and your part ships today!
$7.32
In Stock

Door Latch Kit

Part Number 475419

This door latch kit comes with the strike and the catch.

Order within the next 12 hrs and your part ships today!
$3.28
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 9 reviews What's this?
1-5 of 9
 

466 of 469 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGlenda from Covington, LA

Hinges had broken over time

easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 31 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerBruce from Seminole, FL

Door latch & door strike broken on dryer

I removed the broken door latch & strike with pliers. Then I pushed the new parts into place

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 19 people found this instruction helpful

Parts Used

  • Door Catch

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMichelle from Dallas, TX

My husband ruined the old latch by trying to shut the door too hard, and the old latch fell down into the inside of the dryer.

I took the new latch out of the package and snapped it into place. It took about 15 seconds, and that included the walk to the laundry room!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Door Catch

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDustin from Edmonds, WA

Door won't close

. Supper easy I can't beleive it was over $20 for a little peice of plastic!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKarl from Nanuet, NY

Dryer would not heat up

First I removed two screws holding a bracket that keeps the two ignition coils in place and removed the wires to the two coils. I replaced the old coils with the new coils, re-attached the wires and re-secured the bracket. I also replace the door catch simply using a flat head screw driver to remove the broken catch and pushed in the new catch. The Lint Screen is a simple replacement requiring no tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 9