Quick Question!

Have you ever purchased from PartSelect.com before?

418307-1-S-Frigidaire-131622202         -Lint Trap Cover
418307-1-S-Frigidaire-131622202         -Lint Trap Cover 418307-2-S-Frigidaire-131622202         -Lint Trap Cover http://www.partselect.com/Schematics/Frigidaire/L3X616SI.gif

Lint Trap Cover

PartSelect Number PS418307

Screws sold separately.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Compare At

$50.69

You Save

$8.45

Your Price

$42.24
Order within the next 3 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

SCREW

Part Number 417463

Order within the next 3 mins and your part ships today!
$5.89
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

11 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Screw drivers
Customer: Edward from Baltimore, MD

Drying too slowly

Removed access plate from back bottom left
Removed belt from motor
Needed to lift up top of dryer
Inserted flathead screwdirver in front under top to push in two metal clips holding top down
Lifted up top of dryer
Removed 2 screws holding on front of dryer
Removed front of dryer
Broke Door Switch removing front of dryer. I should have depressed the metal sides in and pulled switch through hole.
Instead, I tried to remove the leads. This broke the fragile prongs.
Started dryer (with belt removed so drum doesn't spin)
Verified ignightor came on every heating cycle
Gas turned on properly
Gas turned off after 90 seconds
Gas never came back on
Indicitive of bad coils
New coils solved the problem
Replaced door switch and lint trap cover in the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Lint Trap Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: gigi from great neck, NY

The lint cover trap came off and broke

we simply screwed the new one in place

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Lint Trap Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kevin from Rome, NY

It got lost...

It was very, very simple... I just had to find two screws ( that were not included)...no problem...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3