Quick Question!

Have you ever purchased from PartSelect.com before?

417841-1-S-Frigidaire-131450300         -Lint Filter
417841-1-S-Frigidaire-131450300         -Lint Filter 417841-2-S-Frigidaire-131450300         -Lint Filter http://www.partselect.com/Schematics/Frigidaire/ZHGITR3L.gif

Lint Filter

PartSelect Number PS417841

Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, KENMORE®, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Takes too long to dry.

Compare At

$14.00

You Save

$2.33

Your Price

$11.67
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

16 of 17 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jeff from Bethalto, IL

Lint filter did not fit "squarely" into its place

replaced old filter, only to find that the new one had the same issue. After closer examination, I determined the filter guide that screws into place, which I had removed earlier to clean lint out, did not hold the lint casing correctly. I removed and reinstalled the piece that has the metal moisture sensors, and replaced it, ensure both screws held the lint casing as it should. Now I have two lint filters that fit perfectly! So, if you ever remove the piece wtih the metal sensors, make sure that the lint casing is screwed in correctly when replacing.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Mary from Garland, NC

My lent screen broke on my dryer

I remove the old lint filter and just put the new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

39 of 174 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Patrick from Humble, TX

Squeeking/ grinding really bad

First I pryed up the top cover then opened the access cover on the rear to remove the belt from the drum. Next I removed the front of the dryer to have access to remove the drum. I then removed the 3 screws that hold the drum to the rear drum bearing assembly and pulled the drum through the front of the dryer. I then removed the bearing and proceded to remove the ground ball and reassembled in reverse steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 222 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ellen from Baltimore, MD

Lint filter bent

Vacuumed lint and inserted new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4