417677-1-S-Frigidaire-131390300         -Lint Screen and Frame
417677-1-S-Frigidaire-131390300         -Lint Screen and Frame 417677-2-S-Frigidaire-131390300         -Lint Screen and Frame 417677-3-S-Frigidaire-131390300         -Lint Screen and Frame http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/LY5PWTEU.gif

Lint Screen and Frame

PartSelect Number PS417677

This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 44 reviews What's this?
 

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerDelaine from Fort Atkinson, WI

Well we ordered one and that didn't fit so had to return then we ordered the 2nd one and that worked but really only need the lint screen not the whole frame so it was to expensive for what you need why not sell it separate?

put it in the lint screen spot.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customercharles from nantucket, MA

Replace old screen

take out of box remove old screen drop in new screen

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJOHN from NAUGATUCK, CT

Wire meshing had broken away from the rubber framing tha was to hold it together and lint was bypassing the screen and getting into the vent tube.

Opened the dryer door unsrewed the two phillips holding the filter framework in place did a two second swap-out dropped the new unit into place the new unit and refastened it with the 2 screws that held the old one in place . And was drying a load of clothes within two minutes . . Thank you jg

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersteve from scottsville, KY

Screen fell out of lint screan frame

remove 2 screws,pull frame out. put new in. tighten 2 screws. put lint screen in

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoyce from North Dighton, MA

The lint screen had tears on it which could cause a serious problem, possibly a fire.

I unscrewed the old the lint screen FRAME and easily removed it, replacing it with the new one. The new lint -- SCREEN -- just needed to be squeezed here and there, and molded into a better shape. The screen itself, arrived flattened on the bottom, causing it to be too wide and difficult to remove from the frame. I easily molded it with my hands into the shape of the previous one and it slipped right into place. ( Shaped like an oval, flexible sack.) VERY easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?