417677-1-M-Frigidaire-131390300-Lint-Screen-and-Frame.jpg
417677-1-S-Frigidaire-131390300-Lint-Screen-and-Frame.jpg 417677-2-S-Frigidaire-131390300-Lint-Screen-and-Frame.jpg 417677-3-S-Frigidaire-131390300-Lint-Screen-and-Frame.jpg

Lint Screen and Frame

PartSelect Number PS417677

This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 44 reviews What's this?
1-15 of 44
 

13 of 14 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Birmingham MI

Torn lint screen

Actually, I didn't install the frame. I only needed the lint screen. So EASY, obviously... I just placed the new lint screen in the old frame. We had been messing around with the torn lint screen for more than one year. Installing the new part was as easy as ordering from PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKarl from Nanuet NY

Dryer would not heat up

First I removed two screws holding a bracket that keeps the two ignition coils in place and removed the wires to the two coils. I replaced the old coils with the new coils, re-attached the wires and re-secured the bracket. I also replace the door catch simply using a flat head screw driver to remove the broken catch and pushed in the new catch. The Lint Screen is a simple replacement requiring no tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerStephen J from Highland Mills NY

The idler pulley was screaming for years on this thing finally it gave up

the repair was easy enough, the idler pulley and bracket was 2 screws to access and one bolt to remove. the thing that amazed me was that Parts Select even had the items we needed, the lint trap was trashed for years as well and I'd looked for it a few times but never found it, When we found Parts Select we found every thing the old beast needed. Its much quieter around here now! that sucker used to howl!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAnne from Riverview MI

Lint screen was torn

Removed 2 screws and replaced part--very easy.
I was very happy to find this part for a 1988 dryer

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBindy from Memphis TN

Old screen rusty and torn off from frame - the dryer is quite old but works very well.

Unscrewed old frame, removed it and put in the new one. Now I have a brand new dryer. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerFrank from Las Vegas NV

Dryer lint screen rplacement

removed two screws - replaced lint screen replacement, TIME TO REPLACE UNIT - ONE MINUTE. What made this project a snap was the pictures and graphs( parts replace) uses to ensure you are ordering the exact screen .

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerDelaine from Fort Atkinson WI

Well we ordered one and that didn't fit so had to return then we ordered the 2nd one and that worked but really only need the lint screen not the whole frame so it was to expensive for what you need why not sell it separate?

put it in the lint screen spot.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customercharles from nantucket MA

Replace old screen

take out of box remove old screen drop in new screen

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJOHN from NAUGATUCK CT

Wire meshing had broken away from the rubber framing tha was to hold it together and lint was bypassing the screen and getting into the vent tube.

OPENED THE DRYER DOOR UNSREWED THE TWO PHILLIPS HOLDING THE FILTER FRAMEWORK IN PLACE DID A TWO SECOND SWAP-OUT DROPPED THE NEW UNIT INTO PLACE THE NEW UNIT AND REFASTENED IT WITH THE 2 SCREWS THAT HELD THE OLD ONE IN PLACE . AND WAS DRYING A LOAD OF CLOTHES WITHIN TWO MINUTES ..
THANK YOU JG

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLuann from Huntersville NC

Lint screen had torn

For me it wasn't even a repair, but rather, open the package, take out and discard the old lint tray and pop the new one in! Done. I didn't have to replace the frame. I would like to comment on how easy ordering was from partselect.com and how quickly the part arrived. Very satisfied customer! Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersteve from scottsville KY

Screen fell out of lint screan frame

remove 2 screws,pull frame out. put new in. tighten 2 screws. put lint screen in

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoyce from North Dighton MA

The lint screen had tears on it which could cause a serious problem, possibly a fire.

I unscrewed the old the lint screen FRAME and easily removed it, replacing it with the new one. The new lint -- SCREEN -- just needed to be squeezed here and there, and molded into a better shape. The screen itself, arrived flattened on the bottom, causing it to be too wide and difficult to remove from the frame. I easily molded it with my hands into the shape of the previous one and it slipped right into place. ( Shaped like an oval, flexible sack.) VERY easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBill from Shelby MI

Riped lint screen

This was easer than, well brushing my teeth. And it took less time than that too. Really, really easy, just like I read.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers, Socket set

CustomerJohn from Rutherford NJ

Belt broken, drum did not rotate, broken lint screen

First of all, check the feedback on your parts installation at partselect.com. You can learn alot and make the job that much easier. I simply popped the top lid on the dryer, remove the electrical connections to the front panel shut off, then removed the screws and popped the tabs for the front panel to install the new belt around the drum. I then opened the back louvered panel to loop the belt correctly around the pulley and proceeded to reinstall both the front and top panels. The lint screen is a simple two screw installation with little or no issues. Once installation was complete the dryer fired up and the drum began to spin once again. A simple repair done at a great savings!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lint Screen and Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHarriett from Leesburg FL

Needed new lint screen for dryer

Removed 2 screws and dropped new screen holder in with lint screen in it and replaced screws. Really easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 44