Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS417463
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
Removed access plate from back bottom leftRemoved belt from motorNeeded to lift up top of dryerInserted flathead screwdirver in front under top to push in two metal clips holding top downLifted up top of dryerRemoved 2 screws holding on front of dryerRemoved front of dryerBroke Door Switch removing front of dryer. I should have depressed the metal sides in and pulled switch through hole. Instead, I tried to remove the leads. This broke the fragile prongs.Started dryer (with belt removed so drum doesn't spin)Verified ignightor came on every heating cycleGas turned on properlyGas turned off after 90 secondsGas never came back onIndicitive of bad coilsNew coils solved the problemReplaced door switch and lint trap cover in the process.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed broken Vane and reinstalled replacemnet real time repair 2 minutes. It took longer to open box than to fix.
Inserted new vane into slots in the drum. I then held the front of the drum while I slid the vane tabs in place by pushing the vane to the back of the drum. Once the vane was in place, I screwed in the screw that came inside the vane kit.
I googled and found parts select, listed model make and found parts diagram, found suspected parts from trouble shooting blog. I read repair stories, people who performed identical repairs, followed their lead, made notes ordered parts and easily repaired my dryer for a fraction of the cost of replacing dryer.
I took off the front of the dryer where the felt liner was located. Took off the old glide and scraped off the old glue with the razor blade. Took the tube of glue from the package and put glue where the old was and pressed the new felt on the dryer front. I then put it together and waited till morning to do a load of clothes. It works fine.
popped the catch in existing hole and replaced the screws
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.