417389-1-S-Frigidaire-131279001         -Door Catch
417389-1-S-Frigidaire-131279001         -Door Catch 417389-2-S-Frigidaire-131279001         -Door Catch 417389-3-S-Frigidaire-131279001         -Door Catch http://www.partselect.com/Schematics/Frigidaire/S8VCFRUN.gif

Door Catch

PartSelect Number PS417389

This washer door catch is a replacement from the original. This is only available in black.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Lid or door won’t close.
  • Lid or door will not open.
  • Will Not Start.
  • Leaking.
  • Noisy.
  • Will not fill with water.
  • Door latch failure.
  • Pumps but will not spin.
  • Compare At

    $16.49
  • You Save

    $2.75
  • Your Price

    $13.74
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

SCRW, 10-16 X .75

Part Number 417465

Sold individually.

Order within the next 9 hrs and your part ships today!
$2.25
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 55 reviews What's this?
1-5 of 55
 

478 of 481 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Maryann from Sandy Hook, CT

The door catch broke and the door would not close.

First, I had to remove 2 screws to take off the 2 broken pieces of the door catch. Then I put the new one on using the same 2 screws. The door is now able to close, but does not lock properly. In order to make it work, I put a thin piece of rubber into the place where the door meets the machine. This causes the lock to engage and the machine to work. I don't know how much longer it will work since the repairman claims that the main bearing is going, but hopefully it will last a bit longer.

Part Select got the part to me in one day using the standard shipping, which was impressive. I just wish that I hadn't wasted money on calling a repairman only to have him tell me that he didn't have the part. He charged for the visit anyway even though I told him ahead of time the problem and the model of my machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

83 of 84 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mark from Vashon, WA

Door would not close

I bought a used front loading washer from a nice lady. These are very expensive new. All it needed was a new part that keeps the door closed during the cycle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

94 of 173 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Cathy from Mountain View, CA

Door latch on front-loading washing machine cracked/broke

The part arrived in record time but, the hardest part of the job was removing the existing screws. Finally had to resort to pulling out the drill and using it with a screwdriver bit to power out the existing screws. Replacing the part itself was super easy. Plus, had to use the drill to even put back in the existing screws. Have to admit, if it ever breaks again (9 years old now) I am worried about getting those screws out/in without stripping something.

Help other customers find the most helpful instructions.

Were these instructions helpful?

91 of 170 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jill from Colfax, CA

Door latch broke and I thought this is it, I'm going to have an expensive repair bill or have to get another washer. Then I had a brain fart, that maybe I could fix it myself. So, I went online, found parts select, easily fournd the part and got it two days later.

I removed the broken latch and kept the two screws and used them to install the new latch. I held my breath when I started the washer, but it ran just like it was supposed. Not bad for a 12year old washer and a 64 year old female owner. And kudos to Frigidaire for making such a good product. And parts select for making it easy to fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

85 of 163 people found this instruction helpful

Parts Used:
  • Door Catch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Sharon from Eureka, CA

The door catch caused a loud buzzer or would not allow the washer to run.

We have not yet installed the part, as we epoxied the old part back together.
However, the part provided was a perfect match, so as soon as it falls apart again we are installing this new part.
Even if it is 2:00 a.m. and insomnia has me doing laundry, I am set! Thanks for the super fast delivery.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 55