Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris C - October 11, 2019
Verified Purchase
Perfect fit, Great price!
Direct replacement as advertised!
★★★★★
★★★★★
Harry H - January 29, 2019
Verified Purchase
piece of cake to do
all's good up n running.....thanks
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 21 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water pump leaking at the seal
Very easy Unhook electricity Took bottom front cover off Took plastic motor cover off Unhooked electrical connections Moved clams on hoses and took hoses off Took bolts out that held in pump Took bottom bracket off of old pump and put it on new pump Turned the adjustable hose connection to the right
... Read more same posstion as old pump Bolted new pump on Connected the water hoses Connected the electrical connections Bolted plastic motor guard back on Bolted on front bottom cover Plugged in and Wallaa!!! I run one load before installing front cover, to watch for leaks And the video sent with email was very helpful Thanks And have a good day!
Read less
Richard from OMAHA, NE
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced leaking pump with motor
Removed old pump and installed new pump in same order. Only problem was reinstalling wire spring clamps with hoses on new pump. Not enough room to use pliers to open clamp. Otherwise a simple installation. A small vise grip pliers might help to hold clamp open. Check and rotate inlet/outlet end of pump as included directions describe firs
... Read moret before installation.
Read less
Jay from EDGEWOOD, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
it dont drain
part was fast easy to put on know work better then before
charlotte from jersey city, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaky pump
I had replaced the pump 5 years earlier and now it was leaking again. When I removed the old pump, I discovered a bobby pin had made its way into the pump and was chewing up the housing, causing a small hole. This was a very simple repair as the pump sits right in the bottom front of the machine. The most difficult part was removing th
... Read moree old hoses and re-attaching them to the new pump. Four bolts/screws and two electrical connectors, which cannot be confused, made this an easy fix.
Read less
Rodger from Fairbanks, AK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pump axle seal was leaking
This is the third time it has been replaced. They last about 2-3 years. Made sure pump was full of water before starting etc so we didn't start with a "dry" pump.
The actual repair and parts ordering went just fine.
Scotty
Scott from Fremont, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old pump leaked
Replacing the pump assembly only involved: 1. Unplugging the washing machine! 2. Removing 2 screws to take off the washing machine's lower front panel. 3. Removing 2 bolts to take off the cover over the remote pump assembly. 4. Changing out the pumps required: A. Unscrewing the 2 screws that secure the assembly ha
... Read morerness to the washing machine's base. B. Unclasping the 2 tubes using curved jaw pliers. C. Disconnecting the electrical connectors by hand. D. Removing 2 bolts from the assembly harness and the pump assembly. 5. Reverse steps 1 - 4 to install the new pump.
Read less
Robert from Glen Allen, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seal on Water pump was leaking
Fairly easy repair to replace the discharge pump assembly. Remove the access door, pump shield, disconnected the hoses, remove the hoses, and the pump housing screws. Orientation of the water pump had to be changed to match original, easily done by rotating the pump hosing. Installed in reverse order and job was complete
Mark from Scarborough, ME
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump was leaking
Remove old pump, only a scrwedriver needed. Save myself @ $100
Jose from Staten Island, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked pump; leaking water
Pump replacement quite simple - most difficult part of job was figuring out how to disassemble outer washing machine panels. Pump required disconnecting 2 hoses and an electrical connection.
David from Jackson, WY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wash water would not drain from tub
Loosened top of washer from spring tabs and leaned it against wall, removed two phillip head screws from the front bottom panel, removed panel. Removed spring clamps from 2 hoses( make sure water is drained from tub before doing this!!) on pump, removed 2 wire connectors. Used nutdriver to remove 2 screws that held down pump. Replaced pum
... Read morep and everything else installs in reverse. Almost forgot, the plate that holds the pump to the bottom of the washing machine has to be removed from the old pump and attached to the new one.
Read less
Larry from Seminole, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ART
February 12, 2020
131268401 pump, is there a gasket for the white plastic hose assembly to pump fitting?
For model number 417.99570110
Hello and thank you for writing.
Your model number is not recognized.
Regretfully, but we cannot find parts, confirm compatibility or do research on questions without your model number.
Here is our link to help you find your full model number:
https://www.partselect.com/Find-Your-Appliance-Model-Number.aspx
We are looking forward to your response.
Was this helpful?
Thank you for voting!
Jacqueline
March 9, 2020
My front load washer (Frigidaire) model #fwt445ges2, the tub seems stuck and loose. It is also making a loud spinning noise when spinning. I am not sure what part do i need to fix the issue. Can you please advise.
For model number FWT445GES2
Hello Jacqueline, thank you for writing. Here is a link to the parts we advise checking and how to check them. I hope this helps. https://www.partselect.com/Repair/Washer/Noisy/
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
