http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/6FZLLLTT.gif
See part 23 in the diagram

Door Cam

PartSelect Number PS4082687

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Fridge section too warm.
  • Clicking sound.
  • Door sweats inside or outside.
  • Unusual Noise.
  • Compare At

    $4.60
  • You Save

    $.77
  • Your Price

    $3.83
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Screw

Part Number 378105

This screw is sold individually.

$2.70
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 36 reviews What's this?
31-36 of 36
 

0 of 1 people found this instruction helpful

Parts Used

  • Door Cam

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJohn from Conyers GA

Refrigerator door on a side by side unit would not stay closed.

First empty the shelves on the refrig. door. Then removed the upper hing cover and removed the three screws holding the hinge to the body of the refrigerator. Lifted the door off the bottom hinge and placed it clear of the unit.
Inspected the bottom hinge and cleaned off the screw holding the closing cam, then with a nutdriver removed the screw holding the cam and removed the cam from the hinge. Installed a new cam closer, secured the cam with a screw. Hanged the door back on the lower hinge and re-installed the upper hinge. Job Complete!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customermichael from Westchester IL

Dor would not close by it,s self

supported door with blocking and removed lower
arm and cam. Replace cam and re installed arm.
removed blocking from door and tested completed installtion of cam. all went well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Cam

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJess from Manchester TN

Door not closing tightly

Removed the door, installed the lower cam & re-installed the door. Diagram & parts list correct. An easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Socket set

CustomerDavid W from yoakum TX

Door would not close

i blocked up door took brakets off replaced plastic cams put back together door works like new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRick from Johnston IA

Door would not close on its own...had to give it a little extra shove

Took off the top cap, undid the 3 screws holding the top door bracket on, took off the door, repshove the lower door closing cam pieces, and then put the door back on...piece of cake, dude.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Cam

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerLOUIS from WOLCOTT CT

Knocking noise when opening@closing door

REMOVED DOOR,TOOK OUT OLD PART@REPLACED WITH NEW

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-36 of 36