Unscrew and remove old handle and replace with new one.
Carol from WEST HILLS, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 of 3 crew connectors on old handle broke off, making pulling action of opening compactor wobbly, loose.
1. Loosen screws to remove old handle. 2. Insert new handle into position, align holes on steel backing with connectors on back of handle. 3. Screw on 3 screws, beginning with middle, then left & right. 4. Tighten to firmness. 5. Close & open to test for installation compketeness.
Choy from APPLE VALLEY, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle to compactor cracked and broken
Super easy - removed the TOP three screws from behind the door. Wiggled the handle out pulling upwards. Slid the new handle in and screwed it back into place. More importantly I had my part the very next day - AWESOME. Thank you.
Linda from SAN DIEGO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle
Inserted three screws in pre-drilled holes.
Walter from Sudbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old plastic handle cracked and was ready to break off.
Ordered new handle thru PartSelect.com, replaced it and I'm good to go.
item shipped very fast, price is what it is, cheapest and only one I could find on the internet.
Thank you, if I ever need parts for appliances again, I will check here first.
David from Cortez, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke off. Three screws to replace
Saved screws from old handle, used to mount new handle.
Kim from Humble, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle fell off
Removed two screws, replaced handle, replaced the two screws. This was so simple! I can't believe we put up with the inconvenience for so long before fixing it!
Barbara from Lutz, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julie
November 8, 2017
I need the handle for this in white. Is it available somewhere? I only see black on your site.
For model number KUCC151EWH0
Hi Julie, Thank you for the question. The white handle has been discontinued and is only made in black now. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Beverly
March 26, 2018
Handle broke on my Jenn-Air compactor, it is hard to read the model # the serial number is 516551cq. What handle would fit?
For model number TC507B0
Hello Beverly, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11747567. Hope this helps!
Was this helpful?
Thank you for voting!
Robert
December 18, 2019
I am ordering a handle and i need the part number for the screws
For model number KUCC151EBLO
Hello Robert, thank you for your question. The handle screw is Single Hex Head Screw
Part #: PS11742731. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
