405198-1-S-Whirlpool-987074            -Water Dispenser Arm
405198-1-S-Whirlpool-987074            -Water Dispenser Arm 405198-2-S-Whirlpool-987074            -Water Dispenser Arm

Water Dispenser Arm

PartSelect Number PS405198

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not dispensing water.
  • Compare At

    $32.26
  • You Save

    $5.38
  • Your Price

    $26.88
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Actuator Arm Pad

Part Number 404849

This black pad is on the actuator arm and it makes a softer surface for your glass to push against to get water/ice dispensed.

$8.20
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMary from Byron Center MI

Water dispenser arm broke off and ice guide was cracked

I removed the 2 screws and replaced the ice guide. I removed the old water dispenser arm along with the spring and little plastic part. I put in the new arm and replaced the spring ,plastic pieceand screws and it worked like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Water Dispenser Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Taylor TX

Water dispenser arm broken

Removed the one screw that holds the dispenser arm on one side and was able to remove the entire assembly. Had to remove the water tube from its holder. Very easy only two philips head screws hold it in place. Fitted the new arm in place while positioning the water tube in the space above the dispener arm. replaced the first screw removed that holds the dispenser assembly in place. Reattached water tube. Repair complete and working better than new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Water Dispenser Arm

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames L from Sun City AZ

Water arm dispenser (plastic arm broke over the years )

1. removed old broken arm (w/screwdriver)

2. .....gently placed 'new part' in place (of old)
and one (& only one screw), tightened
slightly.....and presto.....
PRESSED ON NEW ARM.....
..............'WATER FLOWED'..... THANKYOU,
JIM

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3