| |
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerNANCY from KEOKUK IA
Icemaker wouldn't work
I REMOVED THE SCREWS THAT ATTACHED THE DRUM HOUSING TO THE BIN. I DETACHED THE AUGER & REMOVED THE BROKEN DRUM ASSEMBLY, TURNING THE AUGER TO THE RIGHT, OPPOSITE WHAT I THOUGHT IT SHOULD BE. I SLIPPED THE END OF THE AUGER INTO THE NEW BIN COUPLER & PUT IT IN PLACE AT THE REAR OF THE BIN. NEXT I SLIPPED THE AUGER DRUM INTO PLACE & TIGHTENED IT TO THE LEFT WITH A SOCKET WRENCH. I SCREWED THE DRUM HOUSING TO THE BIN, PUT THE BIN BACK INTO THE FREEZER & I NOW HAVE ICE THROUGH THE DOOR AGAIN. EASY REPAIR EVEN FOR ME, A 60+ WOMAN.
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver
CustomerDavid from Getzville NY
The ice despenser in the door has never worked properly
Replaced the ice bucket (old one was cracked) the auger, auger coupling and auger drum. The new parts had been redesigned to replace the orginal auger helix and auger sleeve which had been replace two times and never seemed to last more than a few weeks. The new parts work great and we have as much ice available as we need. The replacement was stright forward but I do reccomend that you make a simple drawing of the ice crusher blade and washer locations as you dissassemble them to aid in reassembly.
|
1 of 5 people found this instruction helpful
Parts Used
-
- Icemaker Bin Auger Coupling
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerTanya from Lakebay WA
Auger would not turn properly
I took out the ice bin and in the back where the auger meets the ice bin I had to replace the small plastic piece to hold the auger in place when using the automatic ice maker. It was an easy fix.
|