| |
6 of 8 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerLarry from Lakewood CA
Oven door handle attachment points became brittle, cracked and handle fell off
Removing the old push nuts was the most difficult task and it became necessary to pry each nut flap open a bit using a tiny slot screwdriver tip and then remove the nut from the damaged handle. This took the most time, being careful not to damage the glass front. Once the push nuts were removed, It took less than 5 minutes to reinstall the new handle, push nuts and attach the glass door with new handle with two screws through the oven door. Good as new.
Oh, yes, I returned the push nuts and screws that I ordered because replacements were included with the handle. Select Parts graciously refunded that part of my order.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerTheodore from Glenside PA
The handle supports too long for this model
cut 3/8" off each handle supports and used no. 10 1/2' sheet metal screws to secure handle and door front to the oven door. The supports had to be shorten to allow the door front to fit correctly on the oven door.
|