404017-1-S-Whirlpool-9782065           -Oven Igniter
404017-1-S-Whirlpool-9782065           -Oven Igniter 404017-2-S-Whirlpool-9782065           -Oven Igniter

Oven Igniter

PartSelect Number PS404017

This part is used to light the oven for the bake or broil.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Compare At

    $76.74
  • You Save

    $12.79
  • Your Price

    $63.95
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

43 of 49 people found this instruction helpful

Parts Used

  • Oven Igniter

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRichard from Garden City NY

No heat in oven,broiler did work ,that shows gas valve functioning correctly

I removed bottom drawer of the kitchen aid oven.I could see the gas valve.I opened the door of the oven and removed plate on bottom of the oven .there was no screws holding it down ,I removed a couple of screw for the burner and took out 2 screws for the heating element . In the back of the oven .there is 2 wires .one goes to the gas valve located behind the bottom draw.you know can see it from the front with the draw removed,than move the oven out and take the 4 screws holding the back plate .you will see the other wire the element plugs into .you unplug 2 wires and a few screws and you are done.you save alot of money and since this happens alot .you can compare this to changinging a light bulb.It needs maintence from time to time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 34 people found this instruction helpful

Parts Used

  • Oven Igniter

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerCharles from Carteret NJ

Igniter not coming on

slide out range shut off main gas.

remove storage drawer.

disconnect supply hose.

remove oven door (esier access to burner assy

remove burner covers. unscrew igniter assy.

remove rear panel, disconect igniter, pull wires through
front, remove igniter.

reverse process to install new igniter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2