| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsWrench(Adjustable)
Customeryancey from calhoun GA
Washers,bearing and wing nut replaced
slid basket out removed old broken wingnut,bushing and bearing and replaced new parts! very easy.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoseph from Spokane WA
Washing poorly, irregular noise in wash cycle
I removed the old parts and replaced them with new parts. It failed to solve the problem.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMarie from Plano TX
Dishwaster would not completely drain
My dishwasher was not completely draining. I took the arm that sprays the water off and felt for something that might be stopping up the drain....finding nothing, I took the seal to Home Depot to ask if this ring was broken or if the gap was supposed to be there. The "you can do it, we can help" guys didn't have the faintest idea. So I came home and looked up parts for Whirlpool dishwashers and landed on your site. Found that the wash arm bearing ring was missing on my machine (don't know where or how it got off it's intended spot...never did find it). So I ordered the missing part and fixed it myself. Did I say that I'm 77, a widow and live alone....so I was quite proud of myself. Thank you for such a helpful website for DIYers.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customercarl from danville AL
Leaks out the door
took off the wash arm and replaced bearing ring also replaced door seal cleaned vent and replaced door bumper at bottom and it still leaks
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerConnie from Bell FL
Dishes were not getting cleaned - found missing seal
We watched the repair video at Parts Select and realized we were missing a seal, ordered the parts (**received the next day, we were amazed**) & my 10 yr old son repaired after watching video. THANK YOU
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customertodd from woodstock IL
Broken upper wash arm stabalizer bracket...
very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJim from Federal Way WA
Nut holding the lower wash arm broke off
Found the problem, Looked at partselect.com & found both the hold down nut & the washer for the nut. Ordered both pieces & waited for their arrival. Opened both bags when parts showed up & found the nut has a flat area for the washer to rest against, That flat area was broke almost in half. I was pissed just getting a new piece from a company and seeing this. I had no option but to try & use the nut as it is. I was able to use the dishwasher again, but the nut will not stay with the correct tension on it. It catches on the arm to much & tightens its self up so then the arm will quit moving.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDennis from Flat Rock MI
Bottom rack dirty dishes not cleaning
unscrewed hold down thumb screw pulled up washer spray assembly set in bottom seal then put spray assembly back with bearing on top of spray assembly and reattached thumb screw ,done really took about 30 seconds
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMARY from STATEN ISLAND NY
Wash arm retainer nut snapped off
I UNSCREWED THE REMAINING PART OF THE RETAINER NUT WITH MY FINGER AND THEN I REMOVED THE OLD SPRAYARM SEAL AND REPLACED IT WITH A NEW ONE. NEXT I REMOVED THE WASH ARM BEARING RING AND REPLACED IT WITH A NEW ONE. THEN FINALLY I SCREWED IN THE WASH ARM RETAINED NUT WITH MY FINGERS. I DID ALL THIS WITHIN 5 MINS. I SAVED ALOT OF MONEY DOING IT MYSELF. MY DISHWASHER IS WORKING GREAT. I LOVE KITCHED AID DISHWASHERS. I HAVE ANOTHER ONE IN MY 2ND HOME.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam G. from El Paso TX
Parts worn or missing.
Remove the Lower Spray assembly, remove/replace the worn wash arm bearing ring, and replace the Spray arm Seal then reinstall the Lower Spray Assembly. DONE
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJeanne from Santa Ynez CA
Needed a washer arm bearing ring
PartSelect schematic made it possible for me to confidently order the right part. I think it arrived in 2 days. I quickly installed it. Done! Now the only puzzle is what happened to the old bearing. Was it consumed?? Nothing to stay awake nights wondering about!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRobert from Wyandotte MI
Dishes not getting clean / rinsed
Watched the on-line video. It was so easy, I ordered the part which arrived in about four days. Easily removed the glassware rack, took out the arm, installed the replacement and reinstalled in less than ten minutes. This was better than anything I could have hoped for with my limited mechanical apptitude. Thanks!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customermike from pedro OH
Lower spray arm seal
Unscrewed the plastic screw by hand, removed spray arm and saw the seal was worn. Did this due to the arm did not spin properly and not getting very clean dishes.
Ordered part from Partselect by chance and was lucky I found their site. Parts reorder was very simple.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerClem from Carey OH
Washer bearing wore out
removed washer arm installed new bearing ring,thanks for the quick part delivery,will use your parts in future problems thanks Clem
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRichard from Palo Alto CA
Spray arm was loose, hitting the bottom rack sometimes
Took off the spray arm and checking against your exploded drawing, I noticed there never had been a wash arm bearing ring! So I orderedf one, it arrived in two days and took 5 minutes to install. No more noise, thanks!
|