402231-1-S-Whirlpool-9742946           -Wash Arm Bearing Ring
402231-1-S-Whirlpool-9742946           -Wash Arm Bearing Ring 402231-2-S-Whirlpool-9742946           -Wash Arm Bearing Ring

Wash Arm Bearing Ring

PartSelect Number PS402231

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Unusual Noise.
  • Not draining.
  • Compare At

    $4.51
  • You Save

    $.75
  • Your Price

    $3.76
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 89 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customermike from pedro OH

Lower spray arm seal

Unscrewed the plastic screw by hand, removed spray arm and saw the seal was worn. Did this due to the arm did not spin properly and not getting very clean dishes.
Ordered part from Partselect by chance and was lucky I found their site. Parts reorder was very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wash Arm Bearing Ring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerClem from Carey OH

Washer bearing wore out

removed washer arm installed new bearing ring,thanks for the quick part delivery,will use your parts in future problems thanks Clem

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wash Arm Bearing Ring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Palo Alto CA

Spray arm was loose, hitting the bottom rack sometimes

Took off the spray arm and checking against your exploded drawing, I noticed there never had been a wash arm bearing ring! So I orderedf one, it arrived in two days and took 5 minutes to install. No more noise, thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wash Arm Bearing Ring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Denver CO

Bottom spinner wobbeling

Replaced the spinner washer

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Redmond WA

Remove bottom spinning sprayer, remove busings reinstall.

remove bottom spinning sprayer, remove busings reinstall.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStanley from Liverpool NY

Washer are retainer nut broken

The washer arm retainer nut was broken and the washer arm was dislodged Decided to replace the sprayarm and wash arm bearing ring as they looked worn. Middle wash arm tube holder had been broken but was wired together. Decide to replace it as well. Fedex deliver the package and I was running the dish washer fifteen minutes later. Great service and a simple repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJanet from Ellicott City MD

Spray arm wobbly when rotating

I just followed your very easy instructions on the video and it took me about 5 minutes to replace both worn parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerT from Cincinnati OH

Control panel lights out on oven - dishwasher not working properly, seal and ring broken.

Oven light - Removed 4 screws, unpluged wiring harness on circuit board (3 plugs), removed old control panel and put new one in - less than 15 minutes Very easy !

Dishwasher - Removed spray arm and replaced bearing ring and sprayarm seal - 5 minutes. Very easy !

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wash Arm Bearing Ring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRONEN from WESTON FL

Piece broken

replaced broken piece with the new one... no tools requiered... excellent service from partselect.com

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRobert from Mantua NJ

Bottom wash device plastic attachment screw and bushing broke

replaced items in a snap all is good

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerDonald from Spooner WI

Retainer nut broke and left the lower wash arm loose.

Removed bottom half of nut with pliers, installed new bearings top and bottom and new retainer nut. Ordered the parts on Sunday, delivered and fixed on Wednesday, Great service as we live in a very remote area.

Thanks,,,,,,

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customermarc from Sandpoint ID

Old parts were cracked and broken

A very simple repair EXCEPT: note the angle of the support for the spray arm. It has a subtle cant or offset. If you have it angled the wrong way, the spray arm will rub against the dish rack. It took me a few tries to figure that one out!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wash Arm Bearing Ring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Tenafly NJ

Dishwasher making horrible noises

My wife and I were about to go out shopping for a new dishwasher as our 14 year old kitchenaid was creating such a racket that the dog was hiding. I removed the wash arm assembly and noticed on closer inspection that the wash arm bearing ring ( essentially a small plastic 3/4" washer with a 1/8 " flange) did not have the same appearance for my model dishwaher as the part depicted on PartSelect.com's web site. The flange had worn off. The wash arm was just wobbling and making horrendous noises. I ordered the wash arm bearing ring and received the part the next day , installed it in 5 minutes and saved myself upwards to $750 for a new dishwasher.. Thanks PartSelect JH... New Jersey

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from River Forest IL

The retainer nut had broken, and the ring and seal were damaged.

I removed the old parts and put in the new ones. No tools necessary. It was a snap.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDan from Apex NC

Water leaking (splash) about once a minute under the door.

I had difficulty determining what was causing the problem. One's first take would be that the door bottom seal was bad, but inspection showed it was more of a drip rail than a seal because it didn't appear to be designed to touch the tub tightly when the door was closed.. Then reading on this site (and others), the idea that the washer arm was tiltiing excessivily was suggested. This would allow the full force of the spray to be directeed at the bottom seal. Since the parts were relatively inexpensive, I replaced the arm bearrling ring, and lower arm seal and the arm retaining nut.. (I could see nothing wrong with the arm itself and the arm was relatively expensive. So, I didn't order it. ) The leak stopped. I noticed that the flange on the old arm bearing ring was narrower than the new one, maybe through wear. But, I am still not sure exactly where/how the water was being splashed or driven toward the door to cause the leak. But, with those parts, it's fixed. Putting the parts in was trivial. Remove the nut, lift the arm off. Set the parts in place, Set the arm back in place. Put th nut back on. The nut is a "thumb nut" . No tools required. A tip: use a folded newspaper below the drip point to catch and make apparent any leak/drip. Drops of water on the paper are easy to spot.

Help other customers find the most helpful instructions.

Were these instructions helpful?