Pushbutton Cycle Switch

PartSelect Number PS402037

This 8 position pushbutton switch does not contain the buttons.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

2 of 2 people found this instruction helpful

Parts Used

  • Pushbutton Cycle Switch
  • TIMER

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerLloyd from Issaquah WA

Unable to select wash cycles, intermittently , then stopped altogether. Timmer would not start until manually turning center part of timer.

Removed switch cover by removing 2 top back screws on right and left side. Removed Handle (star screw) and a black screw on each side of handle. Also removed the 4 (small) screws on top. This removes the switch cover.
Remove front panel screws 3 on each side, remove panel. May have to reinstall handle to open and close door for troubleshooting.
Turn power off at the CB panel. Disconnect timer connectors and screws on timer and remove timer.
Remove screws on switch module. and then remove the color coded wires from the back of the module. Both parts are put in to be removed easily. Reinstall parts then test. Worked like new. Parts got here in 2 days, very happy with "Parts Select". Lloyd

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1