Timer - 60Hz

PartSelect Number PS394431

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not shut off.
  • No heat or not enough heat.
  • Will Not Start.
  • Compare At

    $117.14
  • You Save

    $19.52
  • Your Price

    $97.62
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

30 of 40 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Sealy TX

Dryer timer would not turn off

Removed the back of the control panel, removed the 2 screws holding the timer on the units and replaced the timer wire for wire. The timer in place, put the 2 screws in and closed up the panel. tested the dryer work like a charm.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 30 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerKevin from Tampa FL

Dryer doesn't heat and timer won't move

Unfortunately the repair did not go well. I have changed the timer, 3 thermal fuses and the 240v fuse. I have had professional repair folks come to the house and tell me it was the timer.

I have no idea what's left to change or fix but the dryer still doesn't heat and the timer doesn't move.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 13 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers

CustomerChristi from Leipsic OH

Dryer would not stop running had to open door to stop

pulled the dryer out in the room so I had access to the back had to remove 6 screws with nut driver as i pulled off each wire i attached it to the new peice removed knob from front inserted new part with wires connected reattached knob to front. replaced the back of dryer. pushed back into place put in some clothes to test and set my kitchen timer just in case (sometimes I get distracted and forget dryer was running) and it shut itself off could not have been simpler

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 12 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJoe from Columbus OH

Timer broke

Unplugged the dryer, Replaced the timer, Plugged the dryer back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4